Web Results


1.2510 AISI O1 is one of the cold work, oil hardening type tool steels. ... with water hardening steels, but not as thorough as the air-hardening grades.


We are stockholders suppliers the following grades of tool steels, mould steels ... O1 is an oil hardening carbon manganese tool steel, possessing excellent ...


I use O-1 for the following reasons: It's cheap and readily available; It has one of the lowest hardening temperatures of all tool steels, lending itself to ...


most common scale used to identify various grades of steel is the AISI-. SAE scale. In addition, each grade of tool steel has heat treatment guidelines that.


AISI O1 tool steel is a low alloy cold work tool steel that must be ... size selection in ground flat stock and drill rod of all the tool steel grades.


HEAT TREATMENT OF TOOL STEEL. 1. HEAT TREATMENT. OF UDDEHOLM. TOOL STEELS ... Hardness after hardening and tempering. 17. Hardness conversion table.


While one thorough tempering cycle is sufficient for the lower alloyed tool steels like Wl and 01, the more highly alloyed grades such as H13, S7, A2, D2 and ...


high-speed tool steel, are listed in Table I. To be acceptable for either group, an alloy ... sentative grades are plotted in Fig. 1. It is.


1. ENGINEERING HANDBOOK. STEELMAKING Basic descriptions of making carbon, alloy, stainless, and tool steel p. 4. METALS & ALLOYS Carbon grades, types, ...


Feb 28, 2021 ... O1 scores a hardness of 57HRC on the Rockwell hardness chart. However, the amount of hardness can vary from sample to sample depending on the ...


Feb 20, 2018 ... Tool steels are unsung heroes, indirectly touching almost every aspect of modern life. Many of the everyday objects we encounter are punched ...