Q:

How do you repair a wheelchair scooter?

A:

Quick Answer

To repair a mobility scooter, first bring the device out of sleep mode. If the scooter does not function, set it to the drive position, check for any damage to the battery or motor, replace the fuse, and check if the device charges properly. If the scooter loses power, restore power to it. If the scooter's motion is not smooth, check the driving axles. Also, ensure all electrical connections are secure.

Continue Reading

Full Answer

To bring the mobility scooter out of sleep mode, switch the device off and then on again. To set it to the drive position, shift the freewheel or drive lever from neutral to the drive position.

The scooter's battery or motor may get damaged due to exposure to water. In such a case, move the scooter indoors, and towel it dry. Avoid keeping the scooter outdoors.

To check if the scooter charges properly, plug in the battery charger, and check if the green and red lights come on. The red light should be steady. If it is not steady, it indicates that the power supply is interrupted. To resolve this, press Reset. This restores power supply to the charger.

To restore power to a scooter that loses power, press Reset for resetting the circuit breaker present on the battery pack.

A faulty fuse interferes with battery charging. If the scooter's fuse is blown, open the control box, remove the cap, and replace the old fuse with a new one of 2.5-amp capacity.

To correct hindered scooter movement, remove any dirt or debris accumulated in the driving axles. Also, remove dirt and debris from the connectors and plugs, and ensure that the connection between them is tight.

Learn more about Car Parts & Maintenance
Sources:

Related Questions

Explore