Remove bumper sticker glue from the paint on a vehicle without damaging the finish using a hair dryer to warm the adhesive and a plastic card to lift the sticker. Apply tree-sap remover to any remaining glue, and wipe it away. The process takes just a few minutes to complete.Continue Reading
Wash and rinse the area around the glue to ensure there is no dirt or grime that could scratch the surface as you work.
Use a hairdryer to warm the bumper sticker to melt the glue. If a hair dryer is not available, park the vehicle with the sticker in the sun on a warm day to heat the surface. When the surface is hot, most of the glue should peel off with the sticker, making the removal process less work.
Work with a plastic card to lift the edges of the sticker. Grab the edges as they lift and attempt to peel the sticker in a single piece. If it starts to tear, use the card to work from the opposite side to lift the sticker and glue.
Tree-sap remover helps to dissolve any remaining glue so that it becomes less sticky. Apply the product according to the label directions, and allow it time to work.
Use auto-detailing towels to remove any remaining glue, and buff the paint. Wash the car as normal to remove any remaining product.
To repair a car dent, strip the paint from the affected area, mix and apply filler, sand the area, and finish by painting. The process takes about two hours and requires an orbital sander, body filler, hardener, a plastic mixing board, a spreading paddle, rags, polish, auto paints, painting supplies and safety glasses.Full Answer >
Unfortunately, paint is susceptible to many types of material that can ruin its finish, such as bird droppings, bugs and gasoline. Paint needs to be washed and waxed in order to be constantly protected from the elements.Full Answer >
To paint a car, clean the surface, sand, prime, and apply one or more coats of paint. You need 1200- and 2000-grit sandpaper, masking tape, topcoat, clear-coat lacquer, a buffer, an air compressor, a spray gun, paint thinner, rags, an electric or air sander and safety gear to complete this project.Full Answer >
Remove a bumper sticker by heating up a towel, soaking the sticker and scraping off the sticker. Use a mix of rubbing alcohol and eucalyptus oil to remove any remaining glue on the surface of the vehicle.Full Answer >