Q:

What does it mean when a car vibrates when the brakes are applied?

A:

Quick Answer

Having a car vibrate when the brakes are applied is a common problem for many car owners. Most of the time, this is a result of the front brakes being worn out, which is usually due to warping.

Continue Reading

Full Answer

Warping of older brakes usually leads to uneven force distribution around the brake plates when the brakes are applied. This results in vibration of the wheel, which is then transmitted to the rest of the car. The severity of the vibration depends on the severity of the brake pad warping. Pads that are severely worn out tend to make the car vibrate when brakes are applied when driving slowly, but less severe warping is only noticeable when the brakes are applied while the car is moving fast. This in itself is not a major problem, so one can continue using the car for some time once they notice the problem. However, it is important to have the car inspected soon, since the problem could rapidly become worse and cause more noticeable effects. Neglecting a brake problem might result in damage to other parts of the car, such as the tires, which would require more money to repair later on. As brake problems progress, they also make use of a car increasingly unsafe.

Learn more about Brakes

Related Questions

  • Q:

    Why does your car shudder when you apply the brakes?

    A:

    If the car is shuddering when the brakes are applied, the brake pads are warped and require replacement. Brake rotors are the braking surface on the wheel. When warped brake pads are compressed, they will not sit flush with the rotor which will cause the car to vibrate while the vehicle is stopping.

    Full Answer >
    Filed Under:
  • Q:

    How do you change the brakes on a car?

    A:

    Change the brakes on a car by jacking the car up, removing the wheel from the hub, removing the caliper, and then removing the brake pads. Install the new brake pads into the caliper, and reattach the caliper. Bleed the brakes to ensure no air is trapped in the brake lines, and replace the wheel. Finish the job by tightening the lug nuts to the specifications found in the owner's manual for the vehicle and installing the hubcap.

    Full Answer >
    Filed Under:
  • Q:

    Why do car brakes overheat?

    A:

    Car brakes overheat for various reasons, including as a result of riding the brake and applying excessive force to or overusing the brakes. When brakes overheat on a regular basis, hardened spots can develop on the brake drums or the rotors. These "hot spots" resist friction, causing brake failure.

    Full Answer >
    Filed Under:
  • Q:

    How do you bleed the brakes on a car?

    A:

    To bleed the brakes on a car, support the car with jacks, remove the wheels, and connect the clear tubing to the bleeder valve. Pump the brake pedal thrice, hold the pedal down, open the bleeder valve to release the brake fluid and air, and repeat the process to your satisfaction.

    Full Answer >
    Filed Under:

Explore