According to Mobil Oil, it takes 2 hours to install a new radiator. The radiator does not contain any moving parts; however, when corrosion is present, it could cause the radiator to leak coolant.Continue Reading
Radiator leaks can be identified by the presence of green liquid underneath the vehicle. If only a small amount has leaked, then adding additional coolant suffices until a replacement radiator can be obtained. However, if there is a large amount of leakage, then the radiator needs immediate replacement.
Radiators protect the engine by cooling it down. If there is not enough coolant, then the engine could overheat.Learn more about Car Parts & Maintenance
To check your radiator fan switch, turn on the ignition, open the car hood, and listen and watch for the radiator fan to engage. Some vehicles engage the radiator switch when the car is started while other newer models employ a thermostatic switch. Idle the vehicle until it reaches operating temperature and starts to overheat without engaging the fan, then shut the vehicle down to further diagnose the problem.Full Answer >
To bleed a radiator, fill the radiator and the coolant reservoir with a mixture of water and antifreeze, and run the engine with the radiator cap off until the air in the radiator escapes. Finally, refill the radiator and the coolant reservoir to the top, and replace the radiator cap.Full Answer >
When a car radiator leaks it loses coolant, and the engine can overheat. Overheating can lead to severe engine damage or even failure. Although the damage is unpredictable, a common component damaged by overheating is the head gasket, which can crack in extreme heat.Full Answer >
To flush your coolant system, drain the coolant, add a flush solution, let the engine heat up and then cool down, drain the radiator flush solution, and replace the coolant. Remember to dispose of the old coolant in a proper manner, as it is fatal to pets.Full Answer >