A bad torque converter interferes with the transfer of power from the engine to the transmission of a vehicle. It causes transmission overheating, slipping and shuddering and poor fuel economy. Vehicle owners sometimes think their transmission is bad when the real problem is the torque converter.Continue Reading
With a bad torque converter, a vehicle must work harder to maintain the same speed. The engine operates at a higher number of revolutions per minute, decreasing fuel economy and the pressure of the transmission fluid and increasing the amount of heat the system generates.
When a vehicle experiences torque converter problems, it often starts to shudder at speeds between 30 and 45 miles per hour. The shudder feels like the car is driving over a rough road, even though it is on a smooth surface.
Damaged transmissions and torque converter clutches produce large amounts of black debris in the transmission fluid. Change the fluid, and check it regularly to determine if the problem continues.
A speed-stall test helps to determine if a vehicle is experiencing a torque converter problem. Always check with the vehicle manufacturer before beginning this test because it can damage the transmissions of some vehicles. Avoid performing the speed-stall test on vehicles with anti-lock brakes to prevent damaging them. This test illuminates the check engine light on vehicles with electronic monitoring systems.Learn more about Transmission
The symptoms of a bad torque converter include torque shudder, a whirring sound at start up, and less power at lower speeds, according to ETE Reman. The most serious sign is a loud clacking or grinding, which indicates that the torque converter is beginning to disintegrate.Full Answer >
A four-wheel-drive car uses a transfer case to split the engine's power evenly between front and rear axles rather than supplying all the energy to one set of drive wheels. This provides better grip and control in certain surface conditions, since all four wheels are powered. These systems are often paired with traction control systems in order to maintain power, even when one wheel spins freely.Full Answer >
A transmission oil cooler works first through the transmission, engine or power steering pump heating the fluid that flows to the cooler lines. Air moving across the fins of the cooler cools the fluid, then routes it back to the transmission, engine or power steering pump in a constant cycle through the return line.Full Answer >
An automatic gearbox uses a system that includes fluid coupling to transfer the engine's power to the transmission and a set of planetary gears that are locked or unlocked in different combinations to engage different gears. One of the most complicated components in modern vehicles, an automatic gearbox includes mechanical, hydraulic, electrical and computer systems.Full Answer >