There are a variety of problems that crop up when spark plugs need to be replaced. Some of the symptoms include difficulty starting, lack of acceleration, rough idle and increased fuel consumption. In general, spark plugs that need to be replaced cause a variety of poor performance symptoms in a car. Many of these symptoms have other causes, but together they can indicate bad spark plugs.Continue Reading
Spark plugs can be a reason for a car not starting, as lack of spark is one of the two reasons for a car not to start. It can also be the reason behind unusual battery drain. Misfiring cylinders are another symptom of faulty spark plugs. A misfire causes the car to jerk briefly and then continue its normal operation. Similarly, this symptom could be due to the engine surging, which is another sign of faulty spark plugs.
If a car suddenly seems to be consuming way more fuel than usual, the spark plugs could be the culprit. This is due to incomplete combustion because of the inadequate spark. Fuel consumption can go up by as much as 30 percent in these cases. Similarly, the vehicle might feel sluggish and hesitate or lurch upon acceleration.Learn more about Vehicles
To change the spark plugs on a Kawasaki motorcycle, remove the worn out plugs with a ratchet and socket, remove the wires, remove the spark plugs with the socket, and then tighten the new spark plug. The spark plugs are located in the engine, which is found underneath the seat in a Kawasaki motorcycle.Full Answer >
A capacitor discharge ignition is an electronic device that stores an electrical charge and then discharges it through an ignition coil in order to produce a powerful spark from the spark plugs in a petrol engine. CDIs are commonly found on motorbikes and scooters.Full Answer >
To improve the speed of a moped, clean various parts, check and fix the compression, replace tires and tubes, tension the chain, true the wheels and replace and gap the spark plugs. These improvements can be easy or difficult depending on your experience with mopeds.Full Answer >
Some of the reasons that a car can stall when accelerating are a defective throttle position sensor, low fuel pressure and spark plugs that need to be replaced. When the "Check engine" light is on, a code scanner can be used to identify the cause more accurately.Full Answer >