Q:

How do you add coolant to a Chevy Malibu?

A:

Quick Answer

To add coolant to a Chevy Malibu, dilute the coolant with equal parts coolant and water, then pour the coolant-water mixture into the vehicle's coolant reservoir. The coolant reservoir will be located under the vehicle's hood and will say "coolant" on the cap.

Continue Reading

Full Answer

Engine coolant, which is also known as anti-freeze, is a mixture that circulates through an engine to keep it cool during summer months, but it will also not freeze in the cold. It is important to make sure that the engine has enough coolant so that it does not overheat and malfunction. Use the following steps to add coolant to a Chevy Malibu.

  1. Determine the correct coolant
  2. Different year's models of the Chevy Malibu will have different coolant capacities. Refer to the owner's manual to determine which engine coolant should be used.

  3. If necessary, dilute the coolant
  4. Most engine coolants require dilution before being put into the vehicle. Mix the coolant with equal parts distilled water using a funnel and large container. Some coolants will come premixed, so it is important to check the coolant label to see if it says "50/50" or "premixed," in which case the coolant can be added as-is.

  5. Add the coolant to the coolant reservoir
  6. Use a funnel to pour the coolant mixture into the coolant reservoir of the vehicle, which will be located under the hood. Be careful not to spill any of the coolant, as pets or children may ingest it.

Learn more about Car Parts & Maintenance
Sources:

Related Questions

Explore