The most common universal remote control codes for iLo televisions are 1054, 1133, 1168, 1169, 1206 and 1230. If none of the codes work, the remote may be programmable using Code Syncing, which does not require a code.Continue Reading
To use Code Syncing, switch the television on, press the TV button on the remote, then press and hold the Code Search or Program Search button until the LED light on the remote begins to flash. Next, press the power button repeatedly until the TV switches off. Immediately after the television turns off, press the Enter or Program button. If the remote control does not have a dedicated Code Syncing button, the feature may still be installed.
To use Code Syncing on a remote that has no Code Search or Program Search button, turn the TV on, then press the TV button. Next, press the Power or TV button repeatedly until the TV switches off. Press the Program or Enter button. Switch the TV back on with the remote control, and check to make sure all of the applicable buttons, such as Vol+ and Ch-, operate as they should. The same steps can be repeated to control any component with an IR sensor, such as DVD players and sound systems. Just press the applicable source button instead of pressing TV.Learn more about Television & Video
According to Verizon, the remote control codes for an Olevia television are 3131, 3226, 3231, 3232, and 3233 as of October 2014. These codes work with all Verizon remote controls except for the P265. For that remote, the code for the Olevia is 265.Full Answer >
Universal remote control codes for Sharp Aquos televisions vary by model and remote, and DirecTV, Dish Network, Charter and other cable and satellite providers have remote code lookup tools on their websites. Directions for determining and programming remote control codes are also provided.Full Answer >
Press the Guide button on your AT&T U-verse remote control to access the U-verse TV guide. Using the Up and Down remote arrow keys, you can move through channel selections one at a time. The Page Up and Page Down buttons let you switch between pages.Full Answer >
To set the Philips CL019 universal remote control, you must first access the four-digit programming code. Enter the code to sync your remote to the device you want to control.Full Answer >