Programming the Sharper Image jumbo remote simply requires a programming code, a device to program, such as a television or DVD player and the jumbo remote. The jumbo remote is capable of programming up to eight different devices that can be controlled by the remote.Continue Reading
There are two ways to program the Sharper Image jumbo remote, either entering the device code in manually or performing a code search through the remote with the device turned on. Follow the below steps to program the device desired to operate with the Sharper Image jumbo remote.
To set up a universal remote, turn on the device, press the Code Search button, press the device button to be programmed, enter the code for the device, and press Power. If you do not have the code for the device, search for it using the remote.Full Answer >
If both the DVD player and LCD television have HDMI ports, an HDMI cable can be used to connect the two. HDMI ports are generally located on the front, back or side of DVD players and LCD TVs.Full Answer >
Before connecting the DVD player, find a place to put it, where it can reach a power outlet and the television. Find which cables both the DVD player and the television support, and choose the one to use.Full Answer >
Connect a DVD player to an older television by using an RF modulator to convert the audio and video signal from the player into a radio frequency signal that can be fed through a regular antenna connection. The resulting output displays on a preselected channel on your TV.Full Answer >