The SIM card of an iPhone 4 is a memory card that stores contact and phone data. Transfer the SIM card from an old iPhone to a new iPhone by opening the SIM card tray and replacing the card.Know More
Power off the iPhone 4 by holding the button on top of the phone and the home button at the same time for between 15 and 30 seconds. Swipe to turn off the power when directed to do so.
Hold iPhone so that you can see the bottom of the phone. Insert the end of a paper clip into the small hole on the bottom of the phone, and firmly press until the SIM card tray pops out.
Pull out the SIM card tray, and place the SIM card in it, aligning it with the edges of the tray. The writing on the SIM card should face up.
Hold the tray above its slot on the bottom of your phone, and push in until you hear it snap into place. Turn the phone right-side up to make sure that the SIM card tray doesn't fall out.
An iPhone can be used as an iPod without a SIM card, but a SIM card is at least necessary for the initial activation of the device. Post-activation, a SIM card is necessary if users wish to restore an iPhone.Full Answer >
Phones that use SIM cards need the information on the SIM card to utilize cell phone networks, so it is not possible to make standard phone calls without one. It may be possible to use some voice-over-IP services on a wireless Internet connection on a phone without a SIM card.Full Answer >
The iPhone 4 model, which is manufactured by Apple, Inc., can be jailbroken by using paid-for software, such as iJailbreak Pro. Jailbreaking pertains to the method of removing hardware and firmware restrictions on the iOS operating system. It also disables limitations placed by mobile carriers.Full Answer >
According to Apple, iPhone 4 and later models support the most extensive range of Bluetooth activities. Earlier versions of the iPhone include some Bluetooth capabilities as well.Full Answer >