Q:

How is mold on wood killed?

A:

Quick Answer

Mold growing on wood is generally eliminated by wet vacuuming affected areas, applying solutions made from mild detergents and water, then drying the area and vacuuming again. Since removing mold involves handling chemicals that may cause eye and skin irritation, proper personal protections should be used when cleaning; rubber gloves, eye protection and a high-quality dust or pollen mask are ideal. The ideal methods of removing mold from wooden surfaces vary depending on the volume of mold, type of mold and variety of wood.

Continue Reading

Full Answer

Molds that appear on lumber are usually large collections of fungal spores that form and congregate on surfaces. These spores are ideally removed by wiping the affected area, then scrubbing the lumber to remove residual particles. After letting the surface dry, a mixture combining bleach and water should be applied to the surface. Once this substance dries, the area should be wet vacuumed to remove residual water droplets, which may enable the growth of future mold colonies. Water and bleach solutions may be applied by wiping, but spraying is ideal, as wiping surfaces can release mold spores into the surrounding air. Common household bleach and water generally suffice for solutions; a combination of 10 parts water to one part bleach is standard, although solutions can be made stronger by adding more bleach; this is ideal for targeting and treating areas of discoloration and excessive growth.

Learn more about Chemistry
Sources:

Related Questions

  • Q:

    What are some ways to remove mold from an attic?

    A:

    To remove mold from an attic, seal and dry the affected area, remove any mold-covered material, use an appropriate cleaning solution, use a dry-ice gun, and sand or wire-brush the affected areas. Once the mold has been removed, coat all of the attic's surfaces with an antimicrobial or mold-inhibiting material, and ensure the attic is properly ventilated.

    Full Answer >
    Filed Under:
  • Q:

    What are the hazards of black mold to an unborn fetus?

    A:

    Although there is no proven link between pregnancy loss and the inhalation of toxigenic molds such as black mold, animal studies using mice have shown that mold toxins can negatively affect fetal development, as stated by Mold & Bacteria Consulting Laboratories. Pregnant women should avoid exposure whenever possible.

    Full Answer >
    Filed Under:
  • Q:

    What is the best way to remove mold from wood?

    A:

    The best way to remove mold from wood is washing with a mixture of soap, chlorine bleach and water, according to the University of Tennessee. Increasing ventilation helps to lower humidity and keep wood dry, preventing new spores from growing more colonies of mold.

    Full Answer >
    Filed Under:
  • Q:

    How do you remove mold from untreated wood?

    A:

    Remove mold from untreated wood by mixing a solution of chlorine bleach, liquid dish detergent and water. Scrub the wood with this solution, and rinse it thoroughly. Repeat until the mold stains are removed.

    Full Answer >
    Filed Under:

Explore