Q:

# What determines if a system is closed loop or open loop?

A:

Closed-loop and open-loop systems are two different control types. Control theory is an interdisciplinary branch of engineering and mathematics that deals with the behavior of dynamical systems with inputs. Systems in which the output quantity has no effect on the processes' input quantity are open-loop control systems. Systems in which the output quantity and negative feedback affect the processes' input quantity are closed-loop control systems.

Know More

## Keep Learning

Closed-loop control systems have a closed control loop, can counteract against disturbances via negative feedback and have the potential to become unstable if the controlled variable does not fade. Open-loop control systems show an open-loop action and can only counteract against disturbances for which they have been designed to counteract. Germany's Ruhr University Bochum explains this closed-loop versus open-loop control following a simple room heating system example. An open-loop control for a room heating system has an outdoor thermostat fed to a control device. When outdoor temperatures drop to a designated level, the control device triggers the heat source to warm the indoor room temperature. If a window is opened and the room temperature drops, this disturbance goes undetected at the control device because the outdoor temperature influences the indoor room temperature. If the thermostat and control device are moved inside the room, the system becomes a closed-loop control design. The indoor room temperature is measured and determined by the set-point value of the thermostat. If a window is opened, this disturbance is detected by the controller and removed. This disturbance detection and control produce a negative feedback loop.

Sources:

## Related Questions

• A:

According to Encyclopedia Britannica, in the SI and the metre-kilogram-second-ampere systems, "Coulomb" is the unit used to measure the electric charge on an object. It is defined as amount of electricity transported by one ampere current in one second. One Coulomb has approximately 6.24 × 10^18 electrons.

Filed Under:
• A:

Most parts of the world have standardized their electricity supply systems to either 60 hertz (U.S. and most of the Americas) or 50 hertz (Europe and most of Asia). This refers to the number of times per second that alternating current reverses direction.

Filed Under:
• A:

Ballasts, such as those used in fluorescent lighting systems, prevent overheating by limiting the lamp's electrical current, according to Rensselaer Polytechnic Institute. Without a ballast, a lamp would not even be able to start.