A Whirlpool washer may not spin or drain because the pump may be clogged, the breaker may have been tripped and simply needs to be reset, the washing machine lid may be defective, the motor coupler may be broken, a belt may be broken or the transmission isn't shifting properly. Another common cause of this malfunction is the computer inside the washer sending a fault code to the motor due to a load imbalance, an electrical spike or a problem with the computer itself.Continue Reading
There are several ways to fix a machine that will not spin or drain:
Step 1: Perform a master reset
This is the first thing a person should try. Unplug the washing machine, and leave it this way for about 1 minute. Plug the machine back in, and close the machine door six times in 12 seconds to send a message to the computer to reset everything. It may not work on all washing machines, so consult the repair guide to see if it will work for this particular machine.
Step 2: Fix the lid switch
If the lid switch has become defective, it is necessary to remove it from the machine. Consult the machine's repair guide to see where it is located and how to take it out. See if the switch works when it is used to open and close the machine door. If it does not, the lid switch needs to be replaced.
Step 3: Check the water level control if the machine isn't spinning
Open the control panel, and look for the water level valve. If the plastic tube attached to it appears clogged, vinegar can clear it up. If the switch itself appears corroded, it may be necessary to replace it.
If none of these solutions work, consult the user's guide that accompanied the machine. Parts may need to replaced, or a repairman may need to be called.Learn more about Washers & Dryers
The top reasons washing machines stop spinning include load imbalances, defective lid locks, broken motor couplers or belts, defective transmissions, and faulty water pumps. Some issues are more common in top-loading washing machines than in front-loading ones, or vice versa.Full Answer >
To install a Whirlpool dishwasher, choose the right location for the washing machine and set the machine in place. Then connect washing machine hoses from the water sources and hook the drain line to the back of the machine and the drain.Full Answer >
A Whirlpool Duet washer that is not agitating can be fixed by replacing the motor coupling, tightening the drive belt or changing the drive motor. Appliance owners who are not experienced in fixing Whirlpool washers are advised to contact a qualified appliance repair person to fix the problem.Full Answer >
Repairing a Frigidaire front-load washing machine can be as easy as replacing a blown fuse in the circuit box or as complex as installing a new belt or motor. The difficulty of the repair depends on the cause of the problem.Full Answer >