Q:

How do you use swimming pool clarifiers?

A:

Quick Answer

Using a swimming pool clarifier simply involves putting a few ounces of the clarifying solution in the pool every day until the pool is clear. When a swimming pool clarifier is being used, the pool filter should be kept running around the clock.

Continue Reading

Full Answer

Swimming pool clarifiers work by coagulating tiny particles in the water until they become big enough for the pool filter to catch them. A pool will clear more quickly if the main drain is on and if people swim in the pool so as to kick up the particles resting on the bottom of the pool. If the pool has no main drain, a manual pool vacuum should be set upside down at the bottom of the pool.

Learn more about Outdoor

Related Questions

  • Q:

    How much does it cost to install a pool?

    A:

    As of 2015, the costs to install a pool ranges from as low as $1,000 for an above-ground pool or $20,000 to $45,000 for a concrete in-ground pool. Above-ground pools usually average $1,500 to $4,500 to buy before installation while in-ground pools are installed as one piece.

    Full Answer >
    Filed Under:
  • Q:

    How long is an Olympic pool?

    A:

    An Olympic-size swimming pool is 50 meters long. The width is 25 meters. The depth is at least 2 meters, but 3 meters is recommended. An Olympic pool is divided into 10 lanes for the Olympics and eight lanes for the World Swimming Championships.

    Full Answer >
    Filed Under:
  • Q:

    How do you connect a pool pump?

    A:

    Connecting a pool pump to a pool without the aid of professional help requires some wiring knowledge and experience. Before beginning, one must know what electric voltage is running from the circuit breaker inside the house. Pool pumps are wired to run on 115V or 230V, and most are at 230V. It must match the house's voltage.

    Full Answer >
    Filed Under:
  • Q:

    When should I backwash my swimming pool filter?

    A:

    A swimming pool filter should be backwashed when the pressure gauge shows a pressure rise of 8 to 10 pounds above the pressure when the filter is clean. Backwashing cleans the filter by reversing the water's flow through the filter.

    Full Answer >
    Filed Under:

Explore