To use a Swiffer WetJet Mop, assemble the mop and load the cleaner. For the first use, snap together the Swiffer WetJet Mop handle that comes in sections. The sections click together once secured. Continue to assemble the components before adding the cleaning solution.
Open the battery compartment located above the cleaner compartment, and insert the batteries into the compartment. Securely close the compartment to hold the batteries in place. Load the cleaner with the premixed cleaning solution, which is available in plastic containers with lids.
Fit the cleaning solution bottle, along with the lid, into the cleaner compartment, facing downward. It snaps into place once secured. The Swiffer WetJet Mop requires a clean pad on the bottom cleaning surface. Press the pad onto the mop, with the white cleaning surface facing the floor.
Prior to using the Swiffer WetJet Mop on the floor, vacuum the floor to remove the dirt. Place the Swiffer WetJet Mop on the area of the floor that requires cleaning. To initiate the stream of the cleaner, press the button near the top of the handle for about three seconds. To clean the floor, push the pad back and forth around the wet area.
To spray some additional cleaner solution over a new section of the flooring, press the button again. To clean the tough stains, turn the mop head so that the scrubbing strip comes in contact with the floor.