Muriatic acid is a strong acid cleaner used on masonry surfaces to clean stains. With proper use, it removes stains when other cleaners fail. If the acid comes in contact with skin, wash it away with large amounts of water.Continue Reading
Muriatic acid is highly corrosive. It can burn your skin and cause choking, sinus irritation or frostbite, according to HowStuffWorks. Wear a respirator designed for use with hydrochloric acid, gloves, goggles or a face shield and a long-sleeved shirt with long pants or a chemical resistant suit.
Dilute the acid with water at a 1 to 4 ratio. Always add the acid to the water to help prevent acid splashing out of the mixing container. Pour the acid into the water slowly. Mix well.
Use a garden sprayer or paint brush to apply the solution to the stain. You should see a chemical reaction as soon as you apply the muriatic acid. The solution begins to bubble, and it lifts and removes the stain. Leave it in place for 20 minutes.
Use a garden hose and sprayer to rinse away the acid once the stain is gone. Use ample amounts of water to dilute the acid as it washes away.
Muriatic acid is one of the most common simple strong acids, and it has a wide array of uses as a chemical reagent, sanitizer and general cleanser. Also known as hydrochloric acid, it is used in the manufacture of synthetic rubber and the production of tin and uranium. It is also a common ingredient in cleansers that are used to kill bacteria, viruses and fungi in hospitals and food preparation areas. Muriatic acid is a vital compound in the soap making, leather tanning and textile industries.Full Answer >
Proper disposal of muriatic acid is carried out by mixing it with a 10 percent sodium carbonate solution to neutralize it. However, muriatic acid is a hazardous substance, so it's a good idea to check with your local hazardous-waste disposal department for specific disposal information. When in doubt, contact it for help.Full Answer >
Remove mold from concrete using a bleach solution to scrub the surface. If you prefer to use something other than bleach, commercially prepared mold killing detergents and solutions are also available. Regardless of the method you choose, the process is the same.Full Answer >
Vinegar can be used to clean concrete. A simple mixture of warm water and white vinegar is enough to clean everyday dirt from concrete. Mix equal parts warm water and vinegar together and apply to the concrete. Allow the solution to sit for several minutes before wiping down and rinsing.Full Answer >