Before purchasing the materials needed for flexible gas line installation, homeowners need to measure the distance from where the main gas supply is located to where the new gas range is going to be. This is the smallest length the pipe should be. However, when using flexible gas lines, it is possible to go around obstacles, so it might be better to get a longer pipeline for that purpose.Continue Reading
In addition, it is necessary to know the diameter of the gas supply fitting to choose the correct pipeline. When installing the flexible line, people need to place the pipe between the two locations, and connect it using a pipe cutter. To connect each part of the pipeline, workers need to fit one end of the pipe first using a wrench, and then tighten the channel lock. This step is crucial because if the channel lock is loose, it might cause gas leaks later. Workers need to perform the same procedure for all of the pipeline connections.
After installing the pipeline, workers need to turn the gas on and check the pipeline for leaks by coating every inch of the pipe with a mixture of liquid soap and water and examining the entire surface carefully to see if any bubbles appear. If there are bubbles, workers need to tighten the joints more or replace the pipe.Learn more about Home Maintenance