Q:

How does a thermostat work?

A:

Quick Answer

Generally speaking, thermostats work by using a mercury switch that is in contact with a thermometer wire to trigger a temperature-adjustment lever in response to the expansion or contraction of the wires as they are heated or cooled. The expansion and contraction of these wires triggers switch relays that control heating and cooling by triggering either a circulation fan and heater or air conditioner.

Continue Reading
How does a thermostat work?
Credit: Tetra Images Getty Images

Full Answer

Modern thermostats use at least two semiconductors, such as thermistors or resistance thermometers, to switch on the HVAC unit. One switch regulates the mode – heat or cool – while the other controls the circulation fan. Once the switch on the thermostat is moved, the thermometer coil and mercury switch rotate to the left, sending a flow of mercury through the mercury switch. This mercury flow signals a relay that turns on the heater and circulation fan. As the room warms, the thermometer coil expands, causing it to unfurl. This pushes the mercury switch in the opposite direction, breaking the relay contact and shutting off the heat. The opposing movement, in turn, triggers the start of the air conditioner. As the room cools, the thermometer coil contracts, causing it to curl up and tip the mercury switch back to the left.

Learn more about Heating & Cooling

Related Questions

  • Q:

    What complaints do consumers have about White-Rodgers thermostats?

    A:

    The most common complaints that consumers have with White-Rodgers thermostats include the thermostat not following the selected program, the display light not working and the thermostat not reporting the same temperature as the thermometer. They also complain that White-Rodgers thermostats fail to bring on the second stage when needed.

    Full Answer >
    Filed Under:
  • Q:

    How do you calibrate a Honeywell digital thermostat?

    A:

    In order to calibrate a Honeywell digital thermostat, check the thermostat's accuracy with a tube thermometer, make sure the thermostat is clean inside the face plate, and make sure that the thermostat is level with the ground. If the thermostat is not reading the correct temperature, contact Honeywell to have an expert inspect it.

    Full Answer >
    Filed Under:
  • Q:

    How do you replace a three-wire thermostat?

    A:

    To replace a three-wire thermostat, connect each of the three wires to the right connection. The three wires are red, white, and blue or yellow, depending on the manufacturer. If they are connected incorrectly, the thermostat can burn out.

    Full Answer >
    Filed Under:
  • Q:

    How do you install a Honeywell thermostat for the home?

    A:

    To install a Honeywell thermostat, remove the old thermostat, label the wires, and install the new thermostat by matching the wires up to the device. While there are different models of Honeywell thermostats, the basic installation procedure remains the same, and overall, installing the thermostat is a fairly easy task which should only take a homeowner a couple of hours. Be aware that if the thermostat has five wires, rather than the usual four, it may be necessary to install an extra wire.

    Full Answer >
    Filed Under:

Explore