If fluorescent light ballasts have gone bad, they might become dim, buzz, change color or go through fast blinking cycles. All parts of the light should be inspected for default before replacement. A multimeter can be used to make certain that it is indeed the ballast itself that has gone bad.Continue Reading
If the light makes a buzzing sound when it is turned on, this also can indicate there is something wrong with the ballast. Bulbs that flicker or don’t light up at all often do so because the ballast is not regulating the electricity properly between the 120-volt current and the bulbs.
The only sure fire way to tell that a ballast is faulty is to connect it to a multimeter, an electronic measuring instrument also known as a Volt-Ohm meter. If the ballast is working properly, the needle moves across the face of the multimeter once it is hooked up. If the fixture is found to have a faulty ballast, it should be replaced with a new unit.
Fluorescent lamp fixtures wear down just like any device. The ballast is the most important part of the light, as it brings in the voltage required to light the bulb. It also controls the current to keep the bulb from shorting out from too much current.Learn more about Lighting
A 24-inch fluorescent light fixture is a common type of light fixture that measures 24 inches in length and uses fluorescent light tubes rather than standard incandescent bulbs. These fixtures can be purchased in most home improvement and hardware stores.Full Answer >
Find replacement fluorescent light covers for sale online through sites such as Amazon.com, Fluorolite and eBay, as of April 2015. Hardware and home supply stores such as The Home Depot and Lowe's also allow customers to shop for replacement fluorescent light covers online as well as in physical store locations.Full Answer >
While the precise wattage of a fluorescent light fixture depends on its design, fluorescent lights generally use around 25 percent as much energy as a comparable incandescent bulb. This is due to the fact that fluorescent fixtures produce far less heat, allowing them to convert more energy into visible light.Full Answer >
Finding the right ballast for a fluorescent light requires knowing the number and type of fluorescent bulbs in the fixture and the voltage the fixture uses. Using this information, the installer can select a ballast compatible with the type, number of lamps and voltage.Full Answer >