Repainting over chipped paint involves scraping, filling, sanding and painting. If not attended to, the chips or cracks will get worse until the entire surface becomes unsightly.Continue Reading
The first step in repainting over chipped paint is removing the chipped surface until it is smooth. Using a scraper, sandpaper or wire brush, go over the surface several times until the edges are feathered or blended in. The surface should feel smooth to the touch and all loose paint should be removed.
If the chips are deep or there are gouges present, a filler can be used to fill in the layers. The surface then needs to be sanded smooth.
After smoothing the surface, it should be primed before applying the paint as this will produce the best results.Learn more about Home Maintenance
Prepare countertops for painting by cleaning, sanding and priming the surface. Apply latex satin or semi-gloss enamel paint and finish with clear acrylic. Avoid scrubbing the surface until the paint has two to three weeks to cure.Full Answer >
Some tips to paint shutters include removing the shutters from their location, sanding and cleaning them, and applying primer before painting. Choose the paint type and color depending on the shutter material and location. In addition, paint the slats first using light coats, work from the shutter's top to its bottom using a brush or a sprayer, and apply two coats of paint.Full Answer >
Removing spray paint from wood can be a simple process involving sanding or a medium-sized project using chemicals depending on whether the entire wood will be painted to cover the affected area, or a little effort will be employed to restore the wood to its original state. There are various ways of removing the spray paint from wood, some of which include sanding, use of paint remover and repainting.Full Answer >
Painting a metal headboard requires paint remover, a sanding implement, primer, coating and either spray paint or another type of paint put into an aerosol can. Paint the headboard in a well-ventilated area. Wear safety glasses, a ventilator mask and gloves. Work on each side separately, allowing the headboard to dry before turning it over.Full Answer >