How Do You Remove Rust and Corrosion From Stainless Steel?


Quick Answer

You can remove rust and corrosion from stainless steel by scouring it off, using an acidic solution, utilizing alkaline paste or employing commercial rust removal chemicals. Your choice depends on the extent of corrosion and ease of rust removal.

Continue Reading
Related Videos

Full Answer

  1. Dip the rusted part in acidic solutions

    Soak the rusted part on apple cider vinegar or hydrochloric acid. Sprinkle some salt on the surface when using lemon acid. You may also dip the rusted item in soda. Check back after 30 minutes. Use gloves when handling the acids.

  2. Scour off rusted areas

    Use a grinder or sander to scour the rust off. Clamp the rusted metal with a vice, and brush the grinder or sander over the rusted spots.

  3. Apply alkaline pastes

    Utilize baking soda or cream of tartar to remove rust. Mix one or the other with a little water to make a paste. Gently apply it on the rusted part, and leave for at least 30 minutes. Use a scouring pad or steel wool to scour off the part. Clean the steel after removing the rust.

  4. Use commercial rust removers

    Purchase commercial rust removers from household stores. Apply the solution as indicated in user's manual. Wait for the rust remover to work after the time stated in the manual. Clean the paste off of the stainless steel, and scrape off any rust that is left.

Learn more about Cleaning

Related Questions