Q:

# What is an ohmic and a non-ohmic resistor?

A:

A resistor is an electrical device that resists current, and the difference between ohmic and non-ohmic resistors relates to how the resistor reacts to different types of current that pass through it. In an ohmic resistor, the resistance provided is the same regardless of the type of current that passes through the device. In a non-ohmic resistor, the resistance changes depending on the type of current passing through it.

## Keep Learning

The designation of ohmic versus non-ohmic involves an electrical law known as Ohm's Law, which was developed by Georg Ohm. Ohm's law basically says that the current in a circuit is proportional to the amount of voltage in the circuit. Because of this proportionality, when voltage and current are plotted on a graph, their relationship is linear. An ohmic resistor also has this linear relationship if its current and voltage are graphed, according to the physics Web page for Nayland College. Non-ohmic resistors, on the other hand, have an irregular graph that is not linear.

It is important to note that the distinction between ohmic and non-ohmic resistors can be made only when the conditions of the resistor are the constant. If conditions are not constant, then the distinction cannot be made between ohmic and non-ohmic resistors.

Sources:

## Related Questions

• A: Wiring a capacitor to start a motor begins with the connection of the positive terminal of the motor to the resistor. Take one terminal of the resistor, an... Full Answer >
Filed Under:
• A: A light dependent resistor, or LDR, varies resistance in a circuit based on how much light shines on it. When fully illuminated, the LDR has no resistance ... Full Answer >
Filed Under:
• A: A fixed resistor is an electrical component with a fixed resistance that can not be changed. Resistors are used to reduce current and voltage in an electri... Full Answer >
Filed Under:
• A: A potentiometer is a three-terminal variable resistor, while a rheostat is a two-terminal variable resistor. Electricians usually use rheostats to adjust c... Full Answer >
Filed Under:
PEOPLE SEARCH FOR