Q:

# How many bricks are required per square meter?

A:

In the building trade, the rule of thumb is to have 60 bricks for each square meter of surface. A typical brick measures 215 x 102.5 x 65mm. This is enough for one square meter of a "half brick" or "single brick" wall, where the bricks are laid horizontally. The width of the wall is the same as the width of the brick.

## Keep Learning

In a "one brick thick" or "double brick" wall, the width of the wall is equal to the length of the brick. For this type of wall, 120 bricks are needed for each square meter. To determine the total number of bricks needed, multiply the number of square meters by 60 for a single brick wall and 120 for a double thick wall. It is common to add 10 percent to this total in case of breakage.

Sources:

## Related Questions

• A: In the construction trade, a nib is a short section of a wall that juts out from a building's framework. The projection is typically used in the building o... Full Answer >
Filed Under:
• A: A good rule of thumb when deep-sea fishing is to cast lines in areas where seabirds have been feeding, since the smaller fish they target are likely to hav... Full Answer >
Filed Under:
• A: Unobstructed, midday sunlight provides about 100,000 lumens per square meter on the Earth's surface. Illuminance varies according to the geometric relation... Full Answer >
Filed Under:
• A: Types of fire bricks available at Home Depot include porcelain and ceramic bricks. Home Depot also provides pre-made fire pits with fire bricks made from s... Full Answer >
Filed Under:
PEOPLE SEARCH FOR