To install an underground electrical conduit, check local building regulations, dig a trench, lay the conduit, and run UF cable through the conduit. Once the cable line is run, connect it to an electric panel at both ends, and then bury the conduit.Continue Reading
Before digging a trench and installing conduit, review your local building codes and regulations, and acquire any required permits.
With a trench shovel, dig a narrow trench for the conduit, and dig it as deep as is required by the type of conduit, which can be anywhere from 6 to 24 inches. If you have to dig a long trench, rent a trenching machine to help make the job easier.
Fit together sections of conduit along the length of the trench, and then join them with an adhesive that is suitable for the material of the conduit.
Once the conduit is in place, run UF cable, which is electrical cable suitable for underground use, through the conduit. Connect each end of the cable to an electrical panel. For this step, consider hiring a professional electrician to make the wire connections, which may also be required by local building code.
Fill the trench with dirt to bury the conduit and the cable.