To install a roll-up blind, determine which method you wish to use to mount it, attach the blind’s brackets to the mounting surface, and position the round pin into the roller on the bracket. You can choose to mount the blinds inside or outside a window frame or from the ceiling.Continue Reading
Determine where you wish to install the blind, position the hanging brackets in the location where you plan to install the blind, and use a tape measure to measure the exact installation points based on the width of the blind. Mark the location with a pencil, and then use a screwdriver to screw the bracket into position. Make sure the brackets are level and even with one another.
For continuous loop blinds, press the plastic insert into the mounted brackets, and then position the blind into the bracket. Place the round pin into the opening. For spring-roller blinds, place the shade into the brackets, and then insert the round pin end into the cut-out hole on each side.
Adjust and align continuous loop blinds by removing the clutch cover and adjusting the chain stop position. Adjust and align spring roller blinds, lift the shade from the brackets, roll it up, and place it back in the brackets.Learn more about Decor