How do you fill the Jet-Dry in a Samsung dishwasher?


Quick Answer

Refill the Jet-Dry or other rinse aid in your Samsung dishwasher by turning the rinse aid dispenser cover to open the dispenser, filling the dispenser to the fill line and then replacing the cover. The process takes about 5 minutes and requires no tools.

Continue Reading

Full Answer

  1. Open the dishwasher door

    Pull the dishwasher door completely open so that it is parallel with the floor.

  2. Open the rinse aid dispenser compartment

    The rinse aid dispenser is located on the back side of the dishwasher door right next to the detergent fill area. Remove the circular cover by turning it counter-clockwise and lifting it off.

  3. Add liquid rinse aid

    Pour a liquid rinse aid, such as Jet-Dry, into the dispenser compartment. Fill until the rinse aid level reaches the "full" mark on the side of the compartment.

  4. Adjust the rinse aid dispenser setting

    If desired, adjust the level of rinse aid that is dispensed during each rinse cycle by moving the arrow dial inside the compartment. Point the arrow to a higher number to increase the amount of rinse aid that is dispensed. Levels one through four are available.

  5. Close the rinse aid compartment

    Press the cover back into place over the rinse aid compartment. Turn it clockwise to lock it into place.

Learn more about Dishwashers

Related Questions