An F1 error code on a Jenn-Air range model SVE47100W indicates that either a button on the touch pad is stuck or the clock assembly has short-circuited. This problem can also be indicated by an F0 error code.Continue Reading
In the majority of cases where an F1 error code flashes on a Jenn-Air range model SVE47100W, the cause of the problem lies with the touch pad. However, the F1 error code could also indicate an issue with the clock assembly, also known as a circuit board, mother board, or Electronic Range Control (ERC). It is possible that either the touch pad or the clock assembly may need to be replaced.
To find out whether the touch pad or the clock assembly is defective, disconnect the power source and access the control panel. Remove the touch pad and reassemble the control panel without the touch pad. Turn the power back on and wait for at least one hour to see if the F1 error code reappears. If the error code reappears, the problem lies with the clock assembly. If the error code doesn't reappear, then the problem lies with the touch pad.
Alternatively, contact a professional repair technician to examine the problem. Once the problem has been diagnosed, replace the faulty part and the F1 error code should disappear.Learn more about Ovens & Ranges