To calculate square yards for carpet installation, measure the length and width of the area in yards. Multiply length by width to determine square yards. Then add 10 percent to allow for fitting and installation.
A:According to Shaw Floors, nylon carpets are the most versatile of the different types of carpet fibers, and polyester carpets are typically stain-resistant. They are both excellent choices for carpets but have unique characteristics that may make one or the other better suited for a particular room or location.
A:Hardwood floors for a family room are ideal since they are easy to clean and add resale value to the home. It is important to note, however, that the wood needs to be refinished often if the family room gets a lot of foot traffic.
A:The best way to clean a tatami mat is to take it outside, shake off accumulated dust, leave the mat in a dry location for several days, wipe it with a dust cloth, and attack stains with diluted white vinegar. This three-day process requires a large bowl, clean water, white vinegar, a microfiber cloth and a large sponge.
A:To clean stains from carpet, retrieve cleaning tools as quickly as possible, remove solids, and blot the stain. Apply a cleaning product, and let it sit for 10 minutes. Blot the stain with wet cloth, and then blot with a dry cloth.
A:To clean a sisal rug, vacuum the rug, blot it with a cloth moistened with soapy water to remove any stains, and then blot the rug with a dry cloth to remove moisture. You need a vacuum, a bucket, mild soap and clean rags.
A:To shampoo carpet, vacuum it once, sprinkle it with borax and cornmeal, vacuum it again, pretreat stains with vinegar, fill a carpet cleaner with rug shampoo, wash the carpet, rinse it, and dry it. This overnight process requires a vacuum, borax, cornmeal, white vinegar, water, towels, rug shampoo and a carpet cleaner.
A:A wrinkled rug is generally flattened through the use of heavy pressure applied to the rug for a long period of time. It can also be flattened by rolling it in the opposite direction that it wrinkles.
A:To install a carpet, lay down tackless strips and underpads, measure the room, cut the seams, and lay down the new carpet with a knee kicker, carpet stretcher and a stair tool. You need a stapler, duct tape, hammer, chalk line, measuring tape, strip cutter, seam iron, wall trimmer and a rolling pin to complete this project.
A:To clean wool carpet, test the carpet to ensure heat or cleaners do not cause damage to the carpet, then clean the carpet with a steam cleaner if no change occurs after testing. Allow the carpet to dry completely after cleaning.
A:To install carpeting on stairs, measure each step. Apply tackless strips, add the padding, stretch the padding, add the carpet, and staple it. You also need a carpet knife, tape measure, hammer stapler, wall trimmer, stair tool, a straightedge, a seam sealer and hot-melt seaming tape to complete this project.
A:To measure a room for carpet, begin by drawing the room and then measuring the length, measuring the width, measuring possible indents and measuring the door frame. It is also important to remember that measuring a room for the cost of putting in carpet does not include the costs of fitting the carpet and installing it with its underlay.
A:Prevent rugs from sliding on a carpet by installing material on the bottom of the rug to increase the friction between the rug and the carpet. Clear silicone caulk, nonslip underpadding or shelf liner all serve this purpose.
A:To get rid of pet urine stains and odors, pre-treat the area with a coating of baking soda, blot the area with a damp towel to remove the baking soda, then sprinkle more baking soda over the area. Steam clean the area with a cleaning formula designed for pet urine.
A:Remove nail polish from your carpet while it's still wet for best results. Dried nail polish is more difficult to remove. You need a butter knife, clean dry rags, paper towels, nail polish remover and dish soap.
A:Use a carpet knife to cut a carpet smoothly and get the edges you desire without damaging adjacent surfaces. You must mark the cut line, make the cut and trim the carpet. You also need a wall trimmer and a stair tool.
A:To prevent area rugs on top of carpet from sliding, rumpling and curling at the edges, apply caulk to the bottom of the area rugs or place vintage canning jar seals between the area rugs and carpet. According to Apartment Therapy, these methods are relatively inexpensive and effective. They serve as a do-it-yourself alternative to more expensive, although equally effective, rug grippers available at many furniture and home improvement stores.
A:A plastic carpet protector is a thin piece of plastic that sticks to the carpet to protect it from dirt and other items that might cause damage. Carpet-protector plastic usually comes on a roll and has an adhesive that sticks to the carpet but leaves no residue when removed.