Pools & Hot Tubs

A:

Winterize a pool by cleaning it, chemically balancing the water to protect the pool from corrosion, shocking the pool, lowering the water level, draining the filter, removing the ladder from the pool and covering the pool with a cover. Winterizing a pool protects it from weather damage.

See Full Answer
Filed Under:
  • How do you clean an above-ground pool?

    Q: How do you clean an above-ground pool?

    A: The first step when cleaning an above-ground pool is to remove the filter and wash it with a garden hose, followed by a thorough brushing and vacuuming of the pool's interior walls. Weekly treatments with concentrated chlorine help to remove built-up debris and keep the water clear. Compressed chlorine tablets should also be kept in the pool's automatic feeder or skimmer to ensure consistent sanitizing.
    See Full Answer
    Filed Under:
  • What is the average cost of an in-ground pool?

    Q: What is the average cost of an in-ground pool?

    A: The average cost of an in-ground pool is just under $22,000. The dimensions and features of the pool affect the overall cost. The type of swimming pool installed also affects the cost.
    See Full Answer
    Filed Under:
  • Can you use baking soda to treat swimming pools?

    Q: Can you use baking soda to treat swimming pools?

    A: Baking soda, also known as sodium bicarbonate, can be used to raise the alkalinity of a swimming pool. An article on DoItYourself.com recommends that owners keep their swimming pools at a pH between 7.4 and 7.8, while True Blue Swimming Pools suggests a pH between 7.2 and 7.6.
    See Full Answer
    Filed Under:
  • How much chlorine per gallon do I put in my pool?

    Q: How much chlorine per gallon do I put in my pool?

    A: The amount of chlorine required per gallon of water depends on the type of chlorine used to treat the pool. A daily dosage of 11 ounces of liquid chlorine is recommended for every 10,000 gallons of water.
    See Full Answer
    Filed Under:
  • How do I remove pool scum?

    Q: How do I remove pool scum?

    A: The accumulation of pool scum can become a nasty and unhygienic problem. The scum can lead to the buildup of lines of organic waste around the outside of the pool, which becomes very unsightly. To get rid of this pool scum, you need protective eyewear, rubber gloves, a sponge and a bottle of liquid pool scum cleaning product.
    See Full Answer
    Filed Under:
  • How do you keep the water in a paddling pool clean?

    Q: How do you keep the water in a paddling pool clean?

    A: Although paddling pools do not have automatic filtration and chlorination systems, it is possible to chlorinate the water using regular household bleach to keep the water clean, according to the Cloxox Company. It recommends mixing 1/8 cup per hundred gallons of water in two gallons of water, pouring over the surface of the pool and mixing well.
    See Full Answer
    Filed Under:
  • How do you winterize a pool?

    Q: How do you winterize a pool?

    A: Winterize a pool by cleaning it, chemically balancing the water to protect the pool from corrosion, shocking the pool, lowering the water level, draining the filter, removing the ladder from the pool and covering the pool with a cover. Winterizing a pool protects it from weather damage.
    See Full Answer
    Filed Under:
  • How do I get rid of green hair from chlorine?

    Q: How do I get rid of green hair from chlorine?

    A: There are several different methods for removing the green tint caused by chlorine. One of the most popular methods is to create a tomato juice mixture.
    See Full Answer
    Filed Under:
  • Q: How do you chlorinate swimming pools?

    A: To chlorinate swimming pools, choose a chlorinating product and follow the manufacturer's instructions. Be sure to test the water to ensure that chlorine levels are sufficient.
    See Full Answer
    Filed Under:
  • Q: What are some pool cleaning and maintenance tips?

    A: Pool cleaning and maintenance tips include cleaning the pool surface daily, cleaning baskets weekly, vacuuming and brushing pool walls occasionally, and washing pool filters from time to time. Assessing and maintaining pool heaters often and making sure that water levels in the pools are appropriate may help as well.
    See Full Answer
    Filed Under:
  • Q: How do you find a leak in a pool?

    A: To find a leak in a pool, confirm that you have a leak, measure water loss with the filter system running, measure water loss with the filter system off, and locate the leak. Consider calling a professional swimming pool service to repair the leak.
    See Full Answer
    Filed Under:
  • Q: Where can you find a Hayward sand filter guide online?

    A: As of 2016, websites such as Hayward-Pool.com, ManualsLib.com and ManualsOnline.com provide Hayward sand filter guide downloads for free. Users can access the manuals without signing up. Each of these sites offers guides for various sand filter models, and some may be more up to date than others.
    See Full Answer
    Filed Under:
  • Q: How many gallons of water does my pool hold?

    A: To figure out how many gallons of water a pool holds, calculate the surface area and multiply by the depth of the pool to obtain a figure for the cubic volume. Multiply the cubic volume by 7.5 for a square or rectangular pool, 7 for a kidney-shaped pool, or 5.9 for a round or oval-shaped pool.
    See Full Answer
    Filed Under:
  • Q: What is a pool aerator?

    A: A pool aerator is an attachment that pumps the pool water through a sprayer, sending the water through the air and back into the pool in small droplets. Breaking the water into droplets allows it to absorb oxygen, a process that slightly cools the water and reduces the pool's temperature.
    See Full Answer
    Filed Under:
  • Q: How do you clean a hot tub?

    A: Clean a hot tub by removing the filter and adding a biofilm line-flush product. After the product circulates, drain the tub with a submersible pump, wipe it with vinegar, and refill the tub with fresh water. Install a new filter and chemicals, adjusting as necessary.
    See Full Answer
    Filed Under:
  • Q: How do you replace the walls of an above-ground pool?

    A: The walls of an above-ground pool can be replaced by purchasing a replacement pool wall from the manufacturer, replacing the pool and wall liner or buying and installing a new wall and frame kit integrated with the existing pool. Replacement walls must be the exact overall length; different brands and pool models vary drastically in size. In the case of extreme rust or damage, a new wall and frame kit may be a more beneficial solution, suggest PoolsAboveGround.com.
    See Full Answer
    Filed Under:
  • How do you lower pH in a pool?

    Q: How do you lower pH in a pool?

    A: Adding acid to pool water lowers its pH. To lower the pH in your pool, you need a pool water testing kit, a bucket and acid. The procedure takes about 20 minutes.
    See Full Answer
    Filed Under:
  • Q: What causes milky pool water?

    A: Milky or cloudy pool water is often caused by a pH imbalance, inadequate filtration or a chlorine deficiency. Each of these conditions is simple to check and can be easily remedied.
    See Full Answer
    Filed Under:
  • Q: What is an above-ground saltwater pool?

    A: An above-ground saltwater pool is a swimming pool that is constructed above ground and uses a saltwater filtration system. Above-ground saltwater pools require the proper materials to avoid saltwater erosion. The saltwater systems require table salt to create a safe, effective saltwater pool system.
    See Full Answer
    Filed Under:
  • Q: What are some legal restrictions for building swimming pools?

    A: Legal restrictions on building swimming pools vary around the country, but some jurisdictions, particularly the drought-stricken regions of California, have recently enacted strict regulations governing swimming pool construction. Some towns and water districts prohibit the construction of new pools, as of 2015.
    See Full Answer
    Filed Under:
  • Q: How do you drain a Hayward pool pump?

    A: Remove the two drain plugs from the pump to drain a Hayward pool pump, and turn off the electrical supply to the pump before draining. You need grip gloves and a 9/16-inch box wrench or adjustable wrench for the task. You may also need a shop vacuum or an compressor to remove all of the water.
    See Full Answer
    Filed Under:

Explore Outdoor

  • Pools & Hot Tubs