Possible reasons why a pilot light may not stay lit include a problem with the thermocouple, a dirty pilot tub or a strong draft. A problem with a pilot light may cause a gas leak should be fixed immediately.
A:Cleaning the burner and igniter holes and testing the igniter control modules are the two most common repair processes to get a gas stove burner lighting again. Before starting, make sure that the circuit switch to the oven is on and the gas valve is still open.
A:The oven must first be plugged into a working power source. Then, it must be turned on by selecting the desired oven temperature. This causes the bottom heating element in the oven to turn on and the oven to begin heating. The main components of an electric oven are the top and bottom heating elements, thermostat and either dials or electric controls.
A:Make sure that the unit is plugged into an electrical outlet, if it is a single burner independent of a range; otherwise, switch on power to the range and turn on the burner, selecting the correct setting. Then take an appropriate cooking vessel and place it atop the induction unit.
A:Replace the ignitor in an oven by removing the base cover plate, removing the ignitor, connecting the new ignotor and reassembling the oven. Replacement of the electric ignitor in a gas oven is considered an easy project that should take about 15 minutes.
A:Troubleshooting a Kenmore gas range begins with the most common problem, dirty igniters or pilot lights. If the problem involves a surface unit, this is the most likely culprit. Problems related to this issue are easy for the owner to fix in order to avoid a service call.
A:Glass stove tops utilize electromagnetism to produce heat for cooking food. Each glass stove top contains an electronically-controlled metal coil, that creates a magnetic field, which in turn heats the pot or pan and the food contained therein.
A:Leaving an oven on could lead to serious health risks and ultimately death. Leaving an electric oven on and unattended can lead to serious burns or a house fire. If a gas oven is left on and unattended, carbon monoxide poisoning can occur, as can serious burns or fire.
A:A gas stove burns natural gas to produce heat for cooking. Gas stoves may use electronic ignition systems, or they may use a pilot light to keep a flame going for easy ignition. Burner controls adjust the amount of gas flow, while the oven uses a thermostat to maintain temperature.
A:Possible reasons why a pilot light may not stay lit include a problem with the thermocouple, a dirty pilot tub or a strong draft. A problem with a pilot light may cause a gas leak should be fixed immediately.
A:The wattage used on an electric stove can be reduced by using a lower heat setting, as higher settings generally require more wattage. Wattage usage is also reduced by using fewer surface elements to cook and using the surface elements less often.
A:Wood-fired brick pizza ovens cook by using a live fire, hot coals or retained heat. The live fire uses reflective heat and is the hottest method, whereas the hot coals are slightly cooler and the retained heat gives off about the same amount of heat as a traditional oven.
A:To remove the burners from an electric stove, hold the exterior end of the burner coil far from the socket where the electric burner is plugged, and lift the coil slightly above the drip pan. Slowly pull away from the socket, and move the coil carefully until it is released.
A:The heating element should first be tested using a voltmeter to determine the cause of the malfunction. If the heating element is the cause, the heating element needs to be removed, taken to a hardware store to find an appropriate replacement, and the replacement attached identically as the original element.
A:Removing the oven door from its hinges, taking off the inner panel, and replacing the broken glass panels inside are the three main steps in repairing oven door glass. Even if just one of multiple panels breaks, replacing that panel keeps heat from escaping.
A:To repair an oven control panel, remove the control board from the oven, tighten the panel to the board with a screwdriver, then replace and the panel. If the error persists, replace the oven's sensors or the control panel.
A:Replacing stove knobs requires removing the old knobs from the stove by hand and attaching the replacement knobs. Look for the D-shaped part inside the knew knob. Attach the new knob on to the knob's shaft with the D-shape inside the knob facing down.
A:Most standard pots and pans will work on an induction cooking surface. Induction heating requires the use of a metal pan with a high ferrous metal content. Iron and stainless steel have the highest rate of success and typically transfer heat the fastest.
A:A traditional Dutch oven is a heavy pot, usually made of cast iron, that has three legs so that it can cook food over hot coals. Its close-fitting, flat, brimmed lid allows the cook to pile hot coals on top, helping the food to cook evenly.
A:The best oven size depends on two factors: the amount of available space in your kitchen and the foods you cook. The oven must sit level with your counters and fit into the horizontal and vertical opening. The internal space should be large enough to fit your favorite meals.