Doors, Windows, & Locks

A:

You can break open a padlock by learning how to pick a lock, creating a shim or using metal cutters. Shims can be created from simple thin metal, such as a paper clip or coke can, and can be used on both single and double-lock padlocks. Another way to get into a padlocked area without a key is to use a break-away padlock designed by Master Lock.

See Full Answer
  • How do burglar alarms work?

    Q: How do burglar alarms work?

    A: Burglar alarms work by using electrical circuits and sensors to detect intruders. There are types of burglar alarms including motion detectors, which identify changes in position in a specific area, and smoke or fire alarms, which detect possible arson. There are also panic detectors which detect movement changes in a particular area.
    See Full Answer
  • What is a windowsill?

    Q: What is a windowsill?

    A: A windowsill is the lowest horizontal structural piece at the bottom of a window. Interior sills are flat and are made from materials such as wood, vinyl, concrete or glass. Many exterior sills are slanted slightly so that rain can run off.
    See Full Answer
  • How do you paint an exterior wood door?

    Q: How do you paint an exterior wood door?

    A: Paint exterior wood doors using an acrylic paint designed to protect the wood from weather-related damage. Choose a paint that protects against mildew, water stains, dirt and rust. In addition to the paint, outdoor wood painting requires a sanding implement, paint scraper, sponge or steel wool for cleaning, filler and a putty knife.
    See Full Answer
  • How do you do caulking inside windows?

    Q: How do you do caulking inside windows?

    A: Caulking windows is a simple process that can be completed in just a few minutes depending on the number of windows that need to be caulked. The items needed are caulk, tape, a caulking gun, a wire brush, a cloth and scissors.
    See Full Answer
  • What causes moisture in double pane windows?

    Q: What causes moisture in double pane windows?

    A: A failure in the seal of a double-paned window allows moisture to enter in amounts that are too large for the absorbent silica pellets in the window to prevent. Double-paned windows have a layer of gas between the two panes. Constant expansion and contraction of this gas as temperature fluctuates throughout the day places stress on the seal, causing it to fracture.
    See Full Answer
  • How do you open a skeleton key lock?

    Q: How do you open a skeleton key lock?

    A: To open a skeleton key lock without a key, use a tension wrench and short hook to manipulate the lock's pins into the proper position. This procedure takes under 10 minutes.
    See Full Answer
  • How do automatic doors work?

    Q: How do automatic doors work?

    A: Automatic doors are able to detect persons, and open at the appropriate time, through the use of automatic sensors. There are many types of sensors that are used on automatic doors.
    See Full Answer
  • How do you break open a padlock?

    Q: How do you break open a padlock?

    A: You can break open a padlock by learning how to pick a lock, creating a shim or using metal cutters. Shims can be created from simple thin metal, such as a paper clip or coke can, and can be used on both single and double-lock padlocks. Another way to get into a padlocked area without a key is to use a break-away padlock designed by Master Lock.
    See Full Answer
  • What are standard window sizes?

    Q: What are standard window sizes?

    A: Windows are manufactured and sold in a variety of sizes. A few measurements for windows available on the market are: 33.75 inches by 53.75 inches, 27.75 inches by 45.75 inches, and 31.75 inches by 49.75 inches. They also come in a variety of shapes and styles.
    See Full Answer
  • How do I unlock a deadbolt without a key?

    Q: How do I unlock a deadbolt without a key?

    A: If the lock is a single-cylinder deadbolt and the knob inside the door is accessible turning the knob opens the lock. If the lock is a double-cylinder lock or the inside of the door is not accessible, special lock picking tools are necessary. If the deadbolt is not fully locked into position, pressing a credit card or other flat tool into the space left by the partially opened deadbolt allows it to open. Completely locked deadbolts require special lock picking tools to open.
    See Full Answer
  • How deep is a closet?

    Q: How deep is a closet?

    A: The minimum depth for a closet is 24 inches, according to construction expert Tracy DeCarlo. This allows room for clothes hangers to fit in the space without extending past the door frame. A depth of at least 30 inches is recommended for hanging larger items, such as heavy winter coats.
    See Full Answer
  • What is the best way to clean windows?

    Q: What is the best way to clean windows?

    A: The best way to clean windows is not with a commercially prepared window cleaning solution, but with dish soap and water. You also need a single-edge razor, a window scrubber, a squeegee, a chamois, a bucket and old rags.
    See Full Answer
  • How does insulation work?

    Q: How does insulation work?

    A: Insulation slows or prevents heat, sound, electricity, mechanical vibration or radiation from coming through walls. There are four types of insulation: heat insulation, sound and vibration insulation, electrical insulation, and radiation insulation.
    See Full Answer
  • What is needed to make a stable door?

    Q: What is needed to make a stable door?

    A: A stable door can be made by making the boarding and the framing, then painting and glazing and finally hanging. The door should be made out of wood boards.
    See Full Answer
  • How are homemade doorbells made?

    Q: How are homemade doorbells made?

    A: A homemade doorbell can be created by combining several simple items, including a battery, bell, metal strip, reel, wire and bolts to produce a functional circuit that generates and transmits the requisite amount of electricity to generate a doorbell ring. Before building a homemade doorbell, homeowners should make sure that they have the requisite materials. Tools needed to build doorbells include wire connectors, steel bolts, a 6-volt battery, cotton reel, nail or screw, scissors, metal strip, piece of cardboard and a bell or device that makes noise when hit.
    See Full Answer
  • How do you replace screens?

    Q: How do you replace screens?

    A: Replacing a screen generally requires the removal of old screen material from the frame and replacing it with new material, according to BobVila.com. It requires a few basic tools, such as a utility knife, a spline roller, scissors, a small flat-head screwdriver and some tape. The time to complete the replacement is based largely on the size of the screen.
    See Full Answer
  • Q: How do you get rid of condensation inside double glazed windows?

    A: There is no way to get rid of condensation that occurs inside of double glazed windows. If the condensation is occurring on the interior of the window, this means that the air tight seal around the window has failed.
    See Full Answer
  • Q: What are replacement windows?

    A: Replacement windows are windows that are put into an existing window opening to replace the current windows. This is done to replace broken windows and to upgrade to new, energy-efficient windows.
    See Full Answer
  • Q: How do you replace basement windows?

    A: Installing replacement basement windows is not a big task if the framing already exists. However, you need to follow appropriate steps to accomplish the project successfully.
    See Full Answer
  • Q: Where is Reliabilt Windows and Doors located?

    A: Reliabilt Doors and Windows are manufactured in the United States by Jeld-Wen, Inc., which is based in Klamath Falls, Ohio. The Reliabilt Doors and Windows brand is one of the major private brands of Lowe's Companies, Inc. Among the company's other brands include Kobalt tools, allen+roth home decor, Blue Hawk home improvement products, Garden Treasures lawn and patio products and Aquasource faucets.
    See Full Answer
  • Q: What is keyless entry?

    A: Keyless entry is a mechanism on a key ring fob that sends a signal to a car or house to lock or unlock it. It uses radio transmission to send a unique signal to a receiver located in the system it was designed to activate.
    See Full Answer