Q:
How do you dry wet carpet?
A:
Quick Answer
To dry wet carpet, blot the carpet with towels, and dry it with a wet-dry vacuum. Sprinkle baking soda over the carpet, let the soda sit for 30 minutes, and vacuum the carpet. Fan and dehumidify the carpet until it completely dries.
Continue ReadingFull Answer
- Blot the carpet
Blot the carpet with towels to remove as much moisture as possible. Replace the towels once they are saturated. Set the wet-dry vacuum on dry mode, and repeatedly move it over the carpet to further eliminate the moisture.
- Apply baking soda
Sprinkle enough baking soda over the carpet, and let the soda sit for 30 minutes to absorb any traces of water. Vacuum off the baking soda.
- Fan and dehumidify the carpet
Switch on the fan and dehumidifier, and let them run overnight to eliminate any wetness. Press the paper towel into the carpet to test if the carpet is dry.
Sources:
Related Questions
-
Q:
How do you remove lint balls from towels?
A: Lint balls usually occur on towels that have short hair fibers. They usually form from abrasion during washing and drying and often result when towels begi... Full Answer >Filed Under: -
Q:
What is a home remedy to clean grout in the shower?
A: Cleaning grout in the shower requires the use of a scrub brush with nylon or plastic bristles, a roll of paper towels and a gallon of chlorine bleach. A ga... Full Answer >Filed Under: -
Q:
How do people travel with a tiny towel?
A: People who travel with tiny towels are probably using towels specifically designed for traveling. These towels look extremely tiny when packed, but unfold ... Full Answer >Filed Under: -
Q:
How do you restore the clear coat on a car?
A: The clear coat on a car can be restored by using painters masking tape, 800 grit sandpaper, 1,000 grit sandpaper, 1,200 grit sandpaper, an aerosol can of c... Full Answer >Filed Under:
