Common defects that occur in timber include knots, shakes, wind cracks, upsets, twisting, cupping, bowing, rot and insect damage. These defects are typically grouped into three categories: defects caused by natural forces, defects caused by defective seasoning and conversions and biological defects.Continue Reading
Knots, shakes, wind cracks and upsets are defects caused by natural forces. Knots are the hardened stumps of broken or sawn branches, which can weaken or disfigure the surface of timber. Shakes are cracks in the timber caused by excessive heat, frost or twisting due to wind. Wind cracks are the cracks that appear on the outside of a log due to the shrinkage of the exterior surface. Upsets are defects in the grain caused by excessive compression or crushing of the tree when it is young.
Twisting, cupping, bowing are defects caused by defective seasoning and conversion. Twisting occurs when constriction causes the edges of a piece of timber to move out of parallel. Cupping is when the timber dries out in a curved shape. Bowing is a warp along the length of the face of the wood.
Rot and insect damage are biological defects. Rot most often occurs due to the presence of fungi in the timber. Insects weaken the timber because they eat the wood.Learn more about Building Materials
Smart board siding, also known as engineered wood siding, is very durable against rot, insects, and weather. It is also highly resistant to warping while retaining its ability to be easily painted.Full Answer >
The advantages of HardiePlank siding include its long warranty, often up to 50 years, and its resistance to damage from fires, storms, fungus, rot and insects. It also comes in a variety of textures and colors and is an environmentally friendly alternative to other types of siding.Full Answer >
T-111 siding is made of plywood and often suffers rot due to moisture. Splicing a new piece to repair the damaged one is often a better solution than replacing the entire 4-foot by 8-foot sheet of material. Gather the needed materials, including a piece of T-111 for the patch, tape measure, circular saw, pry bar, electric drill and appropriate screws.Full Answer >
To find rot in a used wood fence, carefully examine its posts at the ground level and anywhere the wood comes into contact with vegetation or moisture. In addition to wet rot, be on the lookout for dry rot that occurs as the wood loses the protective oil covering its surface, making it brittle.Full Answer >