Q:

How do you clean flip-flops?

A:

Quick Answer

Soap and water should get most of the grime off your flip-flops. Use a toothbrush that you're planning to throw away to scrub off any persistent muck. You'll need warm water, liquid soap, old rags, an old toothbrush and some baking soda to clean your flip-flops.

Continue Reading

Full Answer

  1. Wash the flip-flops

    Add the liquid soap to the water, wet the rags and wipe your flip-flops to clean. A toothbrush dipped in soapy water can be used to get into the crevices of your footwear.

  2. Use your appliances

    Hook your flip-flops to the top rack of your dishwasher and run them through a full cycle to wash them. The delicate cycle of your washing machine can also help. Put your flip-flops in your machine, throw in a cup of white distilled vinegar, run the cycle and then let them air dry. While this cleaning method usually works for flip-flops, you should be aware that Crocs are not dishwasher-safe.

  3. Use these tricks

    Rub a Mr. Clean Magic Eraser over any stubborn grime. You may require saddle soap cleaner for leather flip-flops. If you're still dissatisfied with the results or if you need to get rid of unpleasant odors, sprinkle your flip-flops with baking soda or baking powder, let them stand overnight, and wash them off in the shower the next morning.

Learn more about Stain Removal

Related Questions

  • Q:

    What are some highly recommended stain removers for fiberglass tubs?

    A:

    Collinite Liquid Fiberglass Cleaner and Weiman Fiberglass Cleaner are two products that provide users with the strength necessary to remove stains and grime from fiberglass tubs, and both products have high ratings on Amazon.com, as of 2015. Homeowners may also mix their own detergents for thrifty cleaning.

    Full Answer >
    Filed Under:
  • Q:

    What are some tips for removing water stains from brushed nickel?

    A:

    Remove water stains from brushed nickel with a simple vinegar and water solution. Mix equal parts water and food-grade white vinegar, and gently apply the solution to the stained brushed nickel using a soft cotton cloth or chamois. Scrub the brushed nickel until the stain lifts, and then thoroughly rinse and dry the area. Wax brushed nickel fixtures after cleaning for an extra layer of protection.

    Full Answer >
    Filed Under:
  • Q:

    What are the best mold cleaning solutions?

    A:

    Mold on hard surfaces is best cleaned using soap and water, commercial cleaners, or a solution of 1 cup bleach per gallon of water, states the Centers for Disease Control and Prevention. If mold is growing on absorbent surfaces, such as carpeting or drywall, it's best to discard the material.

    Full Answer >
    Filed Under:
  • Q:

    How do you remove oil stains from clothes?

    A:

    Remove oil stains from clothes by pretreating them with a solvent-based stain removal product, waiting 10 minutes and then washing the clothes with the hottest water recommended for the fabric. Check the stained area before putting the clothing in the dryer, and repeat the steps if necessary.

    Full Answer >
    Filed Under:

Explore