Q:

How do you clean a burnt stainless-steel pot?

A:

Quick Answer

According to Martha Stewart, burn marks on stainless steel pots can be removed by applying white vinegar to a soft cloth and rubbing the pot until the steel is clear of scorch marks. It is important to dry the pots thoroughly to prevent film build-up. Burn marks can also be removed by applying baking soda and liquid dish soap to the scorched area and allowing the pot to sit overnight.

Continue Reading

Full Answer

After the mixture has penetrated the burnt area, the next step is to rinse and towel-dry the pot. Sticky burnt-on substances such as caramel can be removed from stainless steel by pouring cola or liquid dish soap into the pot and gently simmering the liquid until the caramel loosens. Pouring a mixture of cream of tartar and water into the pot and allowing it to sit overnight also works well to lift burnt-on substances.

Lime juice and salt is another home remedy that removes burnt-on foods and liquids. The acid in the lime juice helps to loosen the burnt substances, while the salt acts as a natural scrubbing abrasive. If residual burn marks remain after treating the pot, use an oxygenated bleach powder to lift remaining residue. Stainless steel tends to be prone to pitting, so it is important to avoid submerging pots and pans in water for extended periods of time.

Learn more about Cleaning

Related Questions

  • Q:

    How do you shine granite countertops?

    A:

    Cleaning and polishing a granite countertop is as easy as using warm water, a small amount of soap and a wet sponge or soft cloth to clean the surface and keep it shiny. If the countertop near the stove or sink is still dull, wipe the area with a soft cloth dampened with acetone to dissolve the grease, oil or soap scum residues.

    Full Answer >
    Filed Under:
  • Q:

    How do I clean my fiberglass bathtub?

    A:

    To clean a fiberglass bathtub, wipe away any dust with a soft cloth, spray the surface with a vinegar solution and clean tough stains with baking soda, advises DoItYourself. Use only nonabrasive rags and cleaners to avoid scratching the fiberglass surface.

    Full Answer >
    Filed Under:
  • Q:

    How do you get a burn mark out of a ceramic stove top?

    A:

    A paste of baking soda and water and some elbow grease is one way to remove scorch marks from a ceramic stove top. All-natural solutions or special cleaners designed for ceramic surfaces are preferred, and the milder they are, the better.

    Full Answer >
    Filed Under:
  • Q:

    How does someone remove shiny iron marks?

    A:

    A good remedy for removing shiny iron scorch marks from fabric is to use hydrogen peroxide with ammonia. Other options for removing shiny scorch marks include laundry detergent, bleach or vinegar, but it depends on how quickly the scorch is remedied.

    Full Answer >
    Filed Under:

Explore