Q:

What is a center punch used for?

A:

Quick Answer

According to Dictionary.com, a center punch is a tool used for making shallow indentations in metal, typically to mark the center of a point for drilling on metal. It is used for this purpose because holes that are not started in a recess tend to wander, thus damaging the metal.

Continue Reading

Full Answer

Since a center punch is just a hard metal rod featuring a tip that angles at 90 degrees, a hammer is also necessary. The punch is centered where the hole is needed, and the base is struck with the hammer to create the guide mark for the drill to form a perfectly placed hole. Automatic center punches are also available that eliminate the need for a hammer.

Learn more about Tools

Related Questions

  • Q:

    How do you find a Bosch tool repair center?

    A:

    To find a Bosch tool repair center, visit BoschTools.com, and complete the service network search form. The search results provide a list of the nearest centers for Bosch tool repair, warranty and maintenance needs.

    Full Answer >
    Filed Under:
  • Q:

    What is the difference between a 66 punch down block and a 110 punch down block?

    A:

    While both function as punch-down blocks used in telephony to cross-connect electrical wires, 110 blocks are the modern and upgraded versions of the 66 block. The latter was designed for analog voice conversations, but the rise in usage of digital data communications shifted preference to the 110 block.

    Full Answer >
    Filed Under:
  • Q:

    How do you break an axle?

    A:

    For a car axle to break, the vehicle must have an overload of weight pulling down on the axle, metal fatigue on the axle causing wear and tear or severe damage to the axle due to off-road driving conditions. As the axle wears down, the components are unable to support the vehicle's weight, thus affecting the ability to turn the wheels.

    Full Answer >
    Filed Under:
  • Q:

    What are some tips for casting metal at home?

    A:

    When casting metal at home, invest in a compact metal foundry that uses readily available materials. Consider using wood charcoal instead of natural gas as fuel. Locate a local commercial foundry to find casting sand and other materials, and use materials with relatively low melting temperatures such as aluminum.

    Full Answer >
    Filed Under:

Explore