Q:

Can you lay laminate flooring over carpet?

A:

Quick Answer

It is possible to install laminate flooring over carpet. For a successful installation, the carpet must be fully adhered, and ideally it should be no more than one-quarter-inch thick.

Continue Reading

Full Answer

Laminate flooring is a versatile and easy-to-maintain floor covering, making it a popular option for many homes. While many outlets discourage the act of laying laminate flooring over carpeting, it can be done. Low-pile carpet, such as Berber, is the easiest option since it allows for a more secure base. Laminate on high-pile carpets makes the floor feel as if it's moving and may cause problems underfoot, so this configuration is not recommended.

Learn more about Carpentry
Sources:

Related Questions

  • Q:

    How do you repair floors damaged by a refrigerator leak?

    A:

    To repair floors damaged by a refrigerator leak, examine the flooring material and determine whether it can be restored or dried out or if it needs to be replaced. Look for signs of discoloration, warping, crumbling, cracking and expansion when inspecting vinyl, laminate and hardwood flooring for water damage.

    Full Answer >
    Filed Under:
  • Q:

    What are some tips for installing wood flooring?

    A:

    When installing wood flooring, the most important tips are to properly prepare the base, acclimate the wood to the normal temperature and humidity of the home, decide on the floor layout ahead of time, and use a flooring nailer tool for installation. Also, installing wood flooring is one of the last projects done in a typical home remodel to avoid physical damage to the surface.

    Full Answer >
    Filed Under:
  • Q:

    How do you prepare a site for hardwood floor installation?

    A:

    To prepare for hardwood flooring, remove the existing flooring and the baseboards, and measure the door casings to ensure the flooring fits under the casing. Cut the casings upward from the floor if necessary, and clean the floor thoroughly. Use a moisture meter to determine whether the subflooring is suitable for hardwood flooring, nail down any loose boards, and lay out the moisture barrier if it is required.

    Full Answer >
    Filed Under:
  • Q:

    How do you remove a plywood subfloor?

    A:

    To remove a plywood subfloor, remove the top layer of flooring, pry up the plywood panels, and flatten broken floor joist nails with a hammer. This process takes several hours. The required supplies are a pry bar, a hammer, goggles, gloves and a reciprocating saw.

    Full Answer >
    Filed Under:

Explore