The most common cause of a leaky toilet is a failed wax seal, which connects the toilet to the drain line. Such failures allow water to leak from under the toilet onto the floor, often resulting in serious structural damage, according to This Old House.Continue Reading
Before replacing the wax seal, This Old House recommends taking time to diagnose the source of the leak by drying up any puddles with old towels. When a new puddle starts to form, its location indicates where the toilet is leaking.
If the leak forms around the base of the toilet, the seal is the most likely cause. Sometimes, tightening the bolts that hold the toilet to the floor stops it from leaking. Tightening in an alternating pattern, while avoiding over-tightening, prevents the base of the toilet from cracking.
Replacing the wax ring requires removal of the toilet. The Family Handyman recommends inspecting the evidence to determine if replacing the wax ring alone is enough to stop the leak. A broken or improperly positioned flange prevents the ring from creating a proper seal and require repair before reinstalling the toilet.
If the floor is starting to show signs of rot due to the leak, installing a flange support transfers the load of the toilet to a more solid portion of the floor. If the rot extends more than 2 inches beyond the flange, the required repairs are much more extensive.Learn more about Plumbing
When the toilet is flushed, water from the tank rapidly drops into the toilet bowl, which forces the waste water down the drain. As the drop in the tank's water level is sensed by the float, the tank refills with water until the float shuts off the supply.Full Answer >
A sewer smell coming from a toilet is an indicator something is wrong in the basic plumbing system, and more particularly, the drain system, according to HowStuffWorks. If the toilet is one that no one uses regularly, the problem is likely due to evaporation of water in the toilet trap. Flushing at least once per week keeps the trap full, preventing sewer gas from escaping the drain.Full Answer >
Flushing toilets use gravity and an increase in the height of water in the bowl when the user activates the flush valve to move water and waste through an "S-bend" into a drain pipe and out of the home. These simple devices have relatively few moving parts and, in most cases, offer many years of trouble-free service.Full Answer >
When water draining from a tub slows as it moves through the pipes, misplaced air is forced back up through another drain, such as a nearby toilet, making it bubble. A bubbling toilet is a sign of a partial clog.Full Answer >