Q:

# How do you do the birdsmouth cut for a rafter?

A:

To make a birdsmouth cut, first calculate the size and orientation of the cut based on the pitch of the roof. Then make the cut, using a chisel and a hand saw or power saw. The cut should measure no more than one-third of the width of the rafter or piece of wood, and it should be made using a sketch or template.

## Keep Learning

A birdsmouth cut in a rafter measures the same angle as the pitch of the roof. If the roof has a 30 degree pitch, the underside of the rafter and the vertical cut of the birdsmouth form a 120 degree angle. The cut itself measures 90 degrees, in order to rest snugly on the right angle of the wall plate.

Named for its beak-like triangle shape, builders use birdsmouth cuts to affix a rafter to the wall plate of a building or to give extra support to a fence. Hand-framed buildings commonly use this type of cut, while modern roof trusses come designed to sit flat on the wall plate, with no birdsmouth cut required.

The birdsmouth cut helps absorb stress from additional weight on a roof, such as snow, stopping the natural downhill motion of a roof by providing a flat surface where the truss rests.

Sources:

## Related Questions

• A: To cut rafters with the help of a framing square, you need to know the pitch of the roof and the roof span, then you need to mark the measurements on the l... Full Answer >
Filed Under:
• A: To build trusses, determine the pitch, or the slope, of the roof, and use a rafter square to measure the angles needed to construct the trusses with the co... Full Answer >
Filed Under:
• A: To measure a roof, find both the area of the house and the pitch of the roof. Calculate the number of roofing tiles necessary to complete the job by multip... Full Answer >
Filed Under:
• A: To determine the roof pitch, place a level on the roof's high side, level the level, and measure the distance between the level's 12-inch mark and the roof... Full Answer >
Filed Under:
PEOPLE SEARCH FOR