Q:

How is a bathroom heat lamp installed?

A:

Quick Answer

Heat lamps are wired into the house just like any other light fixture. It is recommended to hire an electrician since there is a lot of moisture in a bathroom.

Continue Reading

Full Answer

Heat lamps are great for knocking the chill out of a bathroom during the winter months. The size of the room and the main use of the lamp can determine which model is most beneficial. Some lamps are louder than others, and some can produce more heat. Generally, a heat lamp is placed in the ceiling of the bathroom and wired into the house's circuits. This can be done by the homeowner, but a lot of precautions should be taken when working around water. A professional electrician is the best option to have the lamp installed.

Learn more about Lighting

Related Questions

  • Q:

    How do you hang a light fixture with a chain?

    A:

    To install a fixture with a chain, turn off the power, remove the existing light fixture, pre-assemble the new fixture and connect the wires from the new fixture to those in the ceiling box. Chandelier chains typically adjust to different lengths to meet different requirements.

    Full Answer >
    Filed Under:
  • Q:

    What is a 24-inch fluorescent light fixture?

    A:

    A 24-inch fluorescent light fixture is a common type of light fixture that measures 24 inches in length and uses fluorescent light tubes rather than standard incandescent bulbs. These fixtures can be purchased in most home improvement and hardware stores.

    Full Answer >
    Filed Under:
  • Q:

    How do you install LED under-cabinet lighting?

    A:

    Installation of LED under-cabinet lighting involves rewiring or replacing the existing electrical box, mounting the light fixture, connecting the fixture to the power source and activation switch, and testing the LED before installing fixture covers and wall plates. For safety purposes, always disconnect power at the circuit breaker before beginning the installation process.

    Full Answer >
    Filed Under:
  • Q:

    How do you install outdoor motion sensor lights?

    A:

    To install outdoor motion sensor lights, turn the power off to the existing light at the breaker, and remove the wall plate holding the existing light fixture into place. Screw the new light fixture base into place, attach the mounting strap to the wall, and attach the motion sensor wiring to the existing wiring. Screw the motion sensor light into place, and turn the power back on to check the lights.

    Full Answer >
    Filed Under:

Explore