To assemble a drop side crib rail, link the rail to the front of the crib. Place it inside the latch brackets, and slide the rod through the holes. Put a spring over the dowel, and place it above the low hole on the rail. Attach the rod tops to both the headboard and footboard on each side of the rail with screws. Raise and lower the rail to make sure it functions adequately.Continue Reading
The drop side crib rail is merely one piece of a child's crib. To assemble the crib fully, start by moving all of the pieces into the baby's room; cribs are heavy and awkwardly shaped, so moving them room to room may be difficult once they are fully assembled. Secure the latch brackets to the headboard and footboard, making sure they point toward the inside of the crib.
Begin the placement of the stationary rail by sliding a dowel through the headboard and footboard. Put it through the latch brackets, and screw it into place to secure. This process is easier to complete with two people.
Attach the mattress support by following the manufacturer's instructions regarding which side should face up. If the attaching parts are already installed, screw the mattress support to the crib. If not, secure them onto the springs, and then install them.
Install the drop side rail next, and then insert the mattress. Any accessories, such as blankets, nightlights or baby monitors, complete the crib build.Learn more about Furniture