To make an easy Smurf hat, simply use a template to cut two pieces out of white felt and sew them together. Alternately, one can use a white beanie hat or even a small white T-shirt to make a hat.Continue Reading
A blue Smurf is an easy costume, especially since most of the pieces are generally convenient to make or find. The white hat, or red for Papa Smurf, is one of the most recognizable pieces of a Smurf's wardrobe.
Step 1: Measure the head's circumference
Use a tape measure to determine the circumference of the head. Add an inch to allow for overlap when sewing the pieces of the hat together.
Step 2: Draw and cut the template
On a plain piece of paper, draw a template for the hat. The shape is a somewhat sloppy triangle with a rounded tip. Divide the circumference from step one in half to determine the proper width for the bottom. Cut the shape to form the template.
Step 3: Cut the hat out of the chosen material
The material for the Smurf hat can be anything from cotton to wool, but felt will hold the shape best. Fold the material in half and pin the template to the material. Carefully cut around the template with a pair of scissors.
Step 4: Sew the hat
Pin the two pieces of the hat together. Sew the edges either by hand or by using a sewing machine. Stuff it with tissue paper so the hat keeps its shape.Learn more about Sewing
To miter corners, choose a saw, mark a 45-degree angle, and cut the ends of two pieces of wood on the line you marked. A miter joint does not require special tools, but a miter box is inexpensive and helpful if you need to cut numerous mitered corners.Full Answer >
To make a homemade Dammit Doll, cut equal-sized doll shapes out of two pieces of fabric, sew along the edges, invert the doll and add stuffing. Add wool hair and facial features, if desired.Full Answer >
Cut two pieces of fabric into squares, and place one piece of fabric with the design facing up and the other on top with the design facing down. Sew the pieces together, leaving a hole unsewn. Turn the fabric right-side out, and fill with stuffing, then sew the hole closed.Full Answer >
To make a tie fleece blanket, obtain two pieces of fleece that measure 2 yards each. Cut a 56-inch-by-70-inch rectangle from each piece, and then lay the fleece so that the rough sides are together. Cut a 6-inch square from each corner of the fleece. Make the fringe by cutting 6 inches into the fleece at 1-inch intervals around the outside of both layers. Knot the fringes together to complete the blanket.Full Answer >