How Do You Make Paper Airplanes for a Science Project?

How Do You Make Paper Airplanes for a Science Project?

To make paper airplanes for a science project, paper of varying thicknesses should be used to determine which is the most effective. These might include copy paper, construction paper or other heavier paper, as well as paper clips for experimenting with weights. The basic model is made by folding copy paper. Variations on the design are then created and the flight results recorded so that they can be compared with the original.

Step 1: Fold the sheet of paper down the middle

That is, fold the sheet of paper lengthwise along the 11 inch dimension.

Step 2: Fold the upper two corners

Fold the upper two corners at a 45 degree angle to form the nose of the airplane, ensuring they are lined up and do not cross the middle fold.

Step 3: Fold the sides

Fold each side down, using the middle crease as a guide. These should also be even.

Step 4: Fold the wings

Finally, fold the wings down to meet the base of the original fold from Step 1.

Step 5: Experiment with stability

When varying the design, folding the wings up at the edges to create winglets can help with stability. Likewise, thicker paper will ensure greater stability of the form. Paper clips may be used as weights, so experiment with them to create a center of gravity ahead of the airplane's neutral point.