Sewing

A:

The placement for a Girl Scout patch depends on the Girl Scout's level, type of uniform and type of patch. Every member of Girl Scouts has either a tunic, sash or vest on which to put patches, which are also called insignia. Pins are another type of insignia.

See Full Answer
Filed Under:
  • How many yards are in a bolt of fabric?

    Q: How many yards are in a bolt of fabric?

    A: There are typically between 30 and 100 yards of fabric in a bolt of fabric while the width of the fabric is often between 45 and 60 inches. When buying fabric in bulk, the bolt is usually the preferred amount to purchase.
    See Full Answer
    Filed Under:
  • How do you make leather look worn?

    Q: How do you make leather look worn?

    A: Make leather look worn by using rubbing alcohol, sandpaper, a wire brush and dry dirt to distress the surface. The time required depends on the amount of wear desired. Take care with your efforts so you give leather a worn look but do not permanently damage the piece.
    See Full Answer
    Filed Under:
  • How do you set color in fabric?

    Q: How do you set color in fabric?

    A: Set the colors in fabric by washing the material in very cold water with 1/2 cup of iodized salt. The salt prevents the colors from bleeding. Add 1 cup of vinegar to the rinse cycle in order to further set the colors and prevent the colors from fading.
    See Full Answer
    Filed Under:
  • How do you make a fabric headboard?

    Q: How do you make a fabric headboard?

    A: Prepare a drill, needle and thread to create a fabric headboard out of plywood. The steps involved are marking and drilling the plywood, arranging the fabric and batting, attaching the fabric to the plywood, sewing the buttons to the headboard and hanging the headboard.
    See Full Answer
    Filed Under:
  • How do you cut and fray jeans?

    Q: How do you cut and fray jeans?

    A: To create cut-off jean shorts, you simply need to mark the length, cut both legs evenly, and pull some threads from the edges. You need a washable marker, sharp scissors and a seam ripper.
    See Full Answer
    Filed Under:
  • What are disadvantages of wool?

    Q: What are disadvantages of wool?

    A: The primary disadvantage to wool lies in its limited wearability. Wool is a coarse material, which often makes it uncomfortable and itchy to wear. Over time, wool also pills, or forms small balls of fuzz or fabric on the exterior of a garment. In addition, wool is sensitive to the climate it lives in; heat and moisture cause wool to felt, as Love Sewing points out.
    See Full Answer
    Filed Under:
  • How do you get wrinkles out of a nylon flag?

    Q: How do you get wrinkles out of a nylon flag?

    A: Hang up your flag, and spritz the fabric with water. Allow the flag to dry. For deep-set wrinkles, wash your flag as instructed, then dry it flat.
    See Full Answer
    Filed Under:
  • What is the difference between velvet and velour?

    Q: What is the difference between velvet and velour?

    A: Velvet is a woven fabric with a silk pile on top, while velour is a knit, blended cotton fabric. Velvet also typically has less give than velour, which tends to be somewhat stretchy. Both feel and look similar, however.
    See Full Answer
    Filed Under:
  • What is melange fabric?

    Q: What is melange fabric?

    A: Melange fabric is a fabric that has been made with more than one color of fabric, either by using different colored fabrics or made with different fabrics which are then individually dyed. For example, when mixing black and white fibers, it results in a gray-colored melange fabric.
    See Full Answer
    Filed Under:
  • What are the advantages and disadvantages of polyester?

    Q: What are the advantages and disadvantages of polyester?

    A: Polyester tends to be an inexpensive fabric, because it comes from artificial rather than natural sources. Therefore, its components are not subjected to nature's extremes, such as drought or storms. Polyester is durable, and it stretches, making it hard to tear. It does not shrink or crease easily. On the other hand, the material tends to be shiny, which is not always a desired characteristic. Removing stains is often difficult.
    See Full Answer
    Filed Under:
  • What are the advantages of synthetic fibers?

    Q: What are the advantages of synthetic fibers?

    A: A great advantage of synthetic fibers is that they are more durable than most natural fibers. In addition, many synthetic fibers offer consumer-friendly functions such as stretching, waterproofing and stain resistance.
    See Full Answer
    Filed Under:
  • What is the way to get scratches out of leather?

    Q: What is the way to get scratches out of leather?

    A: There are several ways to try to repair scratches in leather, some of which include applying heat from a hair dryer and the use of olive oil. Many leathers do not scratch deeply and easily, and removing lighter scratches is fairly simple with light heat, oil or polish. Deeper scratches may require the use of specific leather repair kits of professional help.
    See Full Answer
    Filed Under:
  • What is polyester cotton?

    Q: What is polyester cotton?

    A: Polyester cotton is a combination of polyester and cotton that is used together to make many different types of clothing and undergarments. One common combination of the two materials uses 51 percent cotton and 49 percent polyester, and is used for bed sheets and pillow cases
    See Full Answer
    Filed Under:
  • Is cotton more breathable than polyester?

    Q: Is cotton more breathable than polyester?

    A: Cotton is more breathable than polyester, but each fabric has its own benefits depending on what it is being used for. Cotton is a popular material for sheets because it is breathable, soft and durable, but it is considered a poor choice for athletic clothing.
    See Full Answer
    Filed Under:
  • How do you make a fireman costume?

    Q: How do you make a fireman costume?

    A: To make a fireman costume, apply reflective tape to the hem and chest of a red, black or yellow rain jacket. Wear matching rain boots, and add a toy fireman's hat to complete the costume
    See Full Answer
    Filed Under:
  • What raw materials are used in nylon?

    Q: What raw materials are used in nylon?

    A: According to the University of Oregon, nylon is formed by gently pouring a solution of sebacoyl chloride in hexane on top of a basic aqueous solution of hexamethylenediamine. A film of nylon forms where the two solutions meet, which can be extracted and spun into threads.
    See Full Answer
    Filed Under:
  • What are some types of vintage print fabric?

    Q: What are some types of vintage print fabric?

    A: Vintage print fabrics harken back to earlier days and include simple block prints from the 1780s, miniature floral designs from the 1820s, Post-Civil War stripes and paisleys, early 1900s pastoral scenes and Depression Era pastels. As technology changed, an increasing variety of printed patterns emerged in the 1940s and 1950s, leading to the psychedelic colors and patterns of the '60s and '70s, as well as '80s glam.
    See Full Answer
    Filed Under:
  • What is twill material?

    Q: What is twill material?

    A: Twill fabric has interwoven diagonal patterns. The weaving in a twill fabric is done by passing a filling thread over a warp thread and then under it a couple of times to give the appearance of diagonal lines.
    See Full Answer
    Filed Under:
  • What is a presser foot?

    Q: What is a presser foot?

    A: A presser foot is a forked, metal device on a sewing machine used for holding the fabric in place while stitching. It is typically spring-hinged to provide some flexibility as the fabric moves beneath it.
    See Full Answer
    Filed Under:
  • How do you sew a French seam?

    Q: How do you sew a French seam?

    A: To sew a French seam, pin the fabric together, and sew a seam. Refold the fabric, and then pin it on the other side. Sew along the seam.
    See Full Answer
    Filed Under:
  • How do I hem a floor-length dress?

    Q: How do I hem a floor-length dress?

    A: To hem a floor-length dress, measure the target length, mark it, cut the excess fabric, mark and pin the hem, iron it, and use a blind hemming stitch to finish the alteration. Hemming a floor-length dress takes at least an hour minimum and requires the correct thread color, a sewing machine, pins, scissors, a seam ripper, an iron and a fabric pencil.
    See Full Answer
    Filed Under: