Dyeing

A:

To set the dye in your blue jeans and prevent bleeding, wash your jeans in cold water with white vinegar. This process takes from the length of one wash cycle to overnight. You need cold water, white vinegar and a washer to complete the process.

See Full Answer
Filed Under:
  • How do you dye sand?

    Q: How do you dye sand?

    A: Create dyed sand for use in crafts and other projects by placing sand in containers and adding food coloring and water. Use single colors, or mix the dyes to create custom colors.
    See Full Answer
    Filed Under:
  • Can you dye leather from brown to black?

    Q: Can you dye leather from brown to black?

    A: Because black is darker than brown, dyeing brown leather black is fairly easy. Changing the color of leather is achieved through the process of staining rather than actually dyeing the material.
    See Full Answer
    Filed Under:
  • How do you use food coloring to tie dye a shirt?

    Q: How do you use food coloring to tie dye a shirt?

    A: Tie dying a shirt with food coloring is similar to tie dying a shirt using any other dye. Use a solution of equal parts white vinegar and water to soak the shirt until saturated. Wring the shirt, and tie it with rubber bands. Apply food coloring in the desired pattern.
    See Full Answer
    Filed Under:
  • How do you dye suede shoes?

    Q: How do you dye suede shoes?

    A: To dye your suede shoes, you'll need a toothbrush, a dye that is specifically designed for suede, protective gloves and fabric or paper for stuffing the shoes. Dream a Little Bigger recommends Fiebing's Suede and Roughout dye for dyeing suede.
    See Full Answer
    Filed Under:
  • Is Rit dye toxic?

    Q: Is Rit dye toxic?

    A: Phoenix Brands produces many products under the Rit name, none of which are toxic. Rit dyes contain no hazardous or harsh additives, and the company explains that it uses no chemicals that pose acute or chronic health hazards, as defined by the American National Standards Institute.
    See Full Answer
    Filed Under:
  • How do you bleach polyester?

    Q: How do you bleach polyester?

    A: Bleaching polyester requires the use of an oxygen-based bleach. Fill a wash basin or washing machine with cool water and an oxygen-based bleach. Follow the package directions of the bleach to find out the necessary ratio of water to bleach. Submerge the fabric in the water, and let it soak overnight. The next day, drain all of the water. If the item is not bleached enough, repeat the process.
    See Full Answer
    Filed Under:
  • How do you use poster paint?

    Q: How do you use poster paint?

    A: Use poster paint to decorate paper or cardboard surfaces, such as banners, posters and appliance box play houses for children. Preschoolers enjoy finger painting with poster paints, and adults appreciate their washable nature.
    See Full Answer
    Filed Under:
  • What is aniline-dyed leather?

    Q: What is aniline-dyed leather?

    A: Aniline-dyed leather is treated with soluble pigments and contains no sealer, paint or insoluble dyes. This type of leather still looks like skin and has visible pores and other imperfections. It is not waterproof. A similar product called semi-aniline leather has the same rustic appearance but has a sealed top layer, which protects it from moisture and stains.
    See Full Answer
    Filed Under:
  • How do you set dye in blue jeans?

    Q: How do you set dye in blue jeans?

    A: To set the dye in your blue jeans and prevent bleeding, wash your jeans in cold water with white vinegar. This process takes from the length of one wash cycle to overnight. You need cold water, white vinegar and a washer to complete the process.
    See Full Answer
    Filed Under:
  • Can a Rit dye chart help you mix new colors?

    Q: Can a Rit dye chart help you mix new colors?

    A: Custom shades of dye can be created using a recipe on Rit's color chart. Rit offers nine core shades with multiple colors in each spectrum that can create new colors when mixed together.
    See Full Answer
    Filed Under:
  • Q: What are the safety precautions when using RIT dye?

    A: RIT dye must not be ingested, as it may cause nausea, gastrointestinal irritation, vomiting and diarrhea. In susceptible persons, RIT dye may cause skin irritation, so users must wash their hands thoroughly after handling the dye. Users should wear rubber gloves to protect their hands from permanent stains, especially when using hot water. RIT dye must not be disposed of through surface or rainwater drainage, as it can end up mixing with drinking water.
    See Full Answer
    Filed Under:
  • Q: Is there a Rit color chart?

    A: Rit maintains dye color charts on its website at RitStudio.com. There are three sets of charts: core colors, Pantone seasonal colors and archive colors. Rit does not sell archive and Pantone colors as pre-mixed dyes and instead provides them as a reference tool.
    See Full Answer
    Filed Under:
  • Q: What are the instructions for using liquid Rit dye?

    A: To use liquid Rit dye, fill a bucket with hot tap water and the dye, thoroughly wet the fabric to be dyed with cool water, place it in the container to soak for 10 to 30 minutes, rinse the fabric thoroughly in a sink, and run it through a washing machine with an old towel to remove excess dye. To dispose of the leftover dye bath, pour the liquid down the drain, and clean the sink immediately to prevent staining.
    See Full Answer
    Filed Under:
  • Q: How do you use Rit dye?

    A: The first step to using the dye is preparing the area by covering it with a plastic table cover or newspaper. Have paper towels and sponges handy. Wear rubber gloves to protect the hands and use plastic buckets or stainless steel pots fort the dye bath.
    See Full Answer
    Filed Under:
  • Q: How do you tie a desert scarf?

    A: In order to tie a desert scarf, otherwise known as a shemagh, fold the scarf into a triangle and drape it over the head about 3/4 of the way to one side, then pull the short end up around the chin and tie the long end to the short end by bringing it in front of the face and around behind the head. This will leave a small slit for the eyes.
    See Full Answer
    Filed Under:
  • Why do people use vinegar when dyeing eggs?

    Q: Why do people use vinegar when dyeing eggs?

    A: Dyeing eggs with vinegar makes the colors more vibrant. The color will be brighter and deeper than those dyeing solutions that only incorporate water and food color.
    See Full Answer
    Filed Under:
  • Q: What are some folding techniques for tie dyeing?

    A: One folding technique for tie dyeing fabric requires folding a shirt, or other piece of fabric, from the bottom to the neck in a zig-zag pattern, creating pleats. An individual should then secure rubber bands around the fabric at even intervals and apply dye to both the front and back.
    See Full Answer
    Filed Under:
  • Q: How do I dye my eyebrow hairs blonde?

    A: Dyeing eyebrows at home is cost-effective, but it can be dangerous. Oprah.com's style guide recommends performing a test for allergic reactions prior to dyeing your eyebrows.
    See Full Answer
    Filed Under:
  • Q: How do you tie-dye socks?

    A: To tie-dye socks, secure rubber bands around the socks, and dip them in pans filled with fabric dye. Wash the completed socks separately from other clothes for several cycles to avoid staining other articles.
    See Full Answer
    Filed Under:
  • Q: How do you dye a white piece of clothing a dark color?

    A: To dye a white piece of clothing, first make sure that the fabric can accept the dye. Ideal fabrics to dye are cotton, linen, silk, wool and ramie, which absorb at least 60-percent of the color. Fabrics to avoid are acrylic, polyester or acetate. Select a dye based on the fiber content of the clothing item.
    See Full Answer
    Filed Under:
  • Can vinegar be used to set dye?

    Q: Can vinegar be used to set dye?

    A: In some cases, it is recommended that individuals who are undertaking a fabric dyeing project use a substance such as salt or vinegar to set the dye, although the exact amount of vinegar to be used and the specific method of use may depend the type of fabric being dyed. For example, a dye company known as the Rit Studio suggests that DIY fabric dyers add 1 cup of white vinegar to a dye bath while attempting to dye nylon, silk or wool, although other manufacturers may suggest using vinegar to set dye for other fabrics, such as cotton or denim.
    See Full Answer
    Filed Under: