How do you install cubicle paper?


Quick Answer

To install cubicle paper, remove the backing in small increments. Starting at the top, press the self-adhesive paper to the wall of the cubicle. Smooth out any bubbles or wrinkles.

Continue Reading

Full Answer

  1. Measure your cubicle

    Measure the walls of your cubicle to know how much cubicle paper to buy. Choose a design that you like.

  2. Peel off the backing at the top

    Cubicle paper is self-adhesive wallpaper for your cubicle. Peel off just the top area of the backing from the cubicle paper.

  3. Press on the paper

    Press the cubicle paper to the wall of the cubicle. Make sure that the edges match up and that the paper is straight. If you don't place it right on the first attempt, self-adhesive wallpaper is sticky enough to withstand repositioning it.

  4. Repeat the process

    Continue peeling off portions of the backing and then pressing the cubicle paper to the wall. Remove the backing about 1 foot at a time. Repeat this process until you reach the bottom of the cubicle wall.

  5. Fix any mistakes

    Smooth out any bubbles or wrinkles in the paper with your hand. If the mistake is too big to fix with your hand, lift the paper up to reapply it to the cubicle wall. Self-adhesive cubicle paper is reusable, so save the backing to store the paper on later.

Learn more about Office Supplies

Related Questions