To set the time on a Casio Illuminator watch, select the home time with the D button. Next, press the C button to move between different settings, such as hours and minutes. Finally, use the B and D buttons to adjust the time. After the settings are correct, press the A button to exit and set the time.Continue Reading
When looking at the watch face, the upper left button is A, the upper right button is B, the lower left button is C, and the lower right button is D. The C button changes from one mode to another. This watch is capable of storing times from several different time zones. The D button changes from one location to the next.
Use the D button to select T-1, which refers to the Home Time City. Hold down the A button until the seconds portion of the display flashes. Press the C button to move between different settings, including hours, minutes, seconds, month, date and year. Once the setting that is to be changed flashes, use the D and B buttons to adjust that setting.
When changing the hours, minutes, month, date and year settings, the D button increases the quantity while the B button reduces the quantity. The D button is also used to toggle between 12-hour and 24-hour timekeeping, and resets the seconds field to zero. Once all of the settings are as desired, press the A button to set the time and exit.
Setting the time on a Casio analog watch involves manipulating the time knob, which is usually located on the side of the watch and next to the watch face. In some analog Casio watches, this knob needs to be loosened by turning it counter-clockwise. Once the knob is loose, pull on the knob until it makes two clicks.Full Answer >
To replace batteries in a Casio watch, open the back case of the watch, remove the old battery, insert the new battery, and then close the case. For this to work, you need a jeweler’s screwdriver set and a pair of tweezers.Full Answer >
To turn off the alarm on a Casio G-Shock watch, the user must first access the "alarm mode" by selecting the button on the bottom-left. In alarm mode, select an alarm, and press the button in the top-left corner to turn it off.Full Answer >
To set the time on a digital watch, locate the Set or Mode button on the watch. Press the button until either the minute or hour unit begins to flash on the display. Use the Adjust button on the watch to set the correct time. Press the Set or Mode button to save the time.Full Answer >