Soap & Body Wash

A:

Soap works by removing dirt, oil and bacteria from the skin, due to fatty acids in the soap that bond with oils. Soap can suspend oil, which can then be rinsed away.

See Full Answer
Filed Under:
  • How is shower gel used?

    Q: How is shower gel used?

    A: Shower gel is used by first mixing it with water on a loofah, sponge or washcloth to create a thick lather, which can then be applied all over the body. Shower gel should be rinsed away with warm water, which avoids any skin irritation after bathing.
    See Full Answer
    Filed Under:
  • What is soap made of?

    Q: What is soap made of?

    A: The three basic ingredients of a typical soap are water, oil and an alkaline solution commonly referred to as lye. Oils that are used can be derived from vegetable or non-vegetable sources. Vegetable sources include rice, coconuts, ground nuts and castor oil plants. Non-vegetable sources include tallow and lard. Soaps also contain ingredients that add color or scent, but they aren't part of the chemical process of soap creation.
    See Full Answer
    Filed Under:
  • What is ph-balanced soap?

    Q: What is ph-balanced soap?

    A: Soap that is pH-balanced is slightly acidic, making it similar to the pH level of human skin, which is about 5.5. The pH scale runs from 0 to 14, with seven being neutral. Less than 7 is acidic, while the higher end of the scale is basic.
    See Full Answer
    Filed Under:
  • What are some of the ingredients found in Dawn dish soap?

    Q: What are some of the ingredients found in Dawn dish soap?

    A: Some of the ingredients that are found in Dawn dish soap include methylisothiazolinone, sd alcohol, sodium chloride, sodium laureth sulfate and magnesium chloride. The ingredients vary slightly among the different varieties of Dawn dishwashing soap.
    See Full Answer
    Filed Under:
  • How can you make goat milk soap?

    Q: How can you make goat milk soap?

    A: Making goat milk soap involves combining the goat milk with oils, shortening and lye. The soap-making process requires goat milk, vegetable shortening, coconut and olive oils, a hand blender, a candy thermometer, a bowl, soap molds, spoons and a pitcher. A mask and rubber gloves also are recommended for safety.
    See Full Answer
    Filed Under:
  • How does soap work?

    Q: How does soap work?

    A: Soap works by removing dirt, oil and bacteria from the skin, due to fatty acids in the soap that bond with oils. Soap can suspend oil, which can then be rinsed away.
    See Full Answer
    Filed Under:
  • How do you make a homemade body wash?

    Q: How do you make a homemade body wash?

    A: To make a homemade body wash, combine honey, jojoba oil, castile soap and vitamin E oil. You also need a hand towel, an empty squeeze bottle, a medium mixing bowl, a funnel, a long wooden spoon and your favorite essential oil. It takes about five minutes to make one batch of body wash.
    See Full Answer
    Filed Under:
  • What are the ingredients in Ivory soap?

    Q: What are the ingredients in Ivory soap?

    A: The ingredients in Ivory soap include perfume, magnesium sulfate, sodium chloride, water, sodium tallowate, sodium cocoate, sodium palm kernelate and sodium silicates. The newer Ivory soap bars use heavier fragrances to create the aloe and lavender scents.
    See Full Answer
    Filed Under:
  • How do you make bath bombs?

    Q: How do you make bath bombs?

    A: To make bath bombs, combine citric acid, baking soda, cornstarch and food dye, add essential oils, and pack the mixture into baking molds. Unmold the bombs after two hours. This 2 1/2-hour procedure requires baking soda, cornstarch, citric acid, water, food dye, a small spray bottle, two glass bowls, a sifter and baking molds.
    See Full Answer
    Filed Under:
  • What makes soap dissolve?

    Q: What makes soap dissolve?

    A: Soap dissolves easily in water because part of its molecular structure is attracted to water molecules. This means that when soap is immersed in water, the attraction pulls these molecules away from each other, bonding them and dissolving the detergent.
    See Full Answer
    Filed Under:
  • What are the ingredients in Dove soap?

    Q: What are the ingredients in Dove soap?

    A: Dove soap has a long list of ingredients including sodium lauroyl isethionate, stearic acid, sodium tallowate, sodium palmitate, lauric acid and sodium isethionate. Additional ingredients also include water, sodium stearate, cocamidopropyl betaine, sodium cocoate, sodium palm kernelate, sodium chloride, tetrasodium ETDA, tetrasodium etidronate, maltol and titanium dioxide. Two of the key ingredients are the cleanser sodium lauroyl isethionate and the moisturizer stearic acid.
    See Full Answer
    Filed Under:
  • Is too much hand sanitizer bad for you?

    Q: Is too much hand sanitizer bad for you?

    A: Using too much hand sanitizer and other commercial household antibacterial products may be harmful because it can lead to antibiotic resistance, according to Healthy Child. Antibiotics are not able to deal with bacterial infections that have antibiotic resistance.
    See Full Answer
    Filed Under:
  • What are the ingredients in Castile soap?

    Q: What are the ingredients in Castile soap?

    A: Castille soap is made of a naturally derived vegetable oil (no animal fat or synthetic materials), cold water, and lye crystals. Olive oil is traditionally used, but others like to experiment with their own mixtures of natural oils.
    See Full Answer
    Filed Under:
  • How do you make soap from leftover bars?

    Q: How do you make soap from leftover bars?

    A: To make soap from leftover bars, gather soap scraps, and use a cheese grater to grate them into a large bowl. Add a small amount of warm water to the soap shreds to make them malleable. Form the soap into the desired shapes, and let them dry for two weeks.
    See Full Answer
    Filed Under:
  • What is an easy, inexpensive soap recipe for beginners?

    Q: What is an easy, inexpensive soap recipe for beginners?

    A: The easiest and most inexpensive way to make soap is with a melt-and-pour soap base. The base must be melted, gently mixed with desired fragrances and dyes and poured into a mold to cool and solidify before it can be used.
    See Full Answer
    Filed Under:
  • How do you make bubble bath?

    Q: How do you make bubble bath?

    A: A simple bubble bath can be made by mixing one egg white, a tablespoon of honey and 1/2 cup of liquid soap. Keep the mix in a clean container and mix thoroughly with a spoon to prevent sudsing.
    See Full Answer
    Filed Under:
  • How do you make goat soap?

    Q: How do you make goat soap?

    A: To make goat's milk soap, combine goat's milk, lye, olive oil, coconut oil, castor oil, rice bran oil, shea butter and sweet almond oil. Other required supplies include a large mixing bowl, a medium mixing bowl, silicone soap molds, water, ice cubes, rubber cleaning gloves, a silicone spatula, a wooden spoon, measuring cups, a metal cooking pot and a stove. It takes about 30 minutes to make one batch of soap.
    See Full Answer
    Filed Under:
  • Q: What does "Calgon, take me away" mean?

    A: The phrase, "Calgon, take me away," originated in a series of advertisements by Calgon bath and beauty products. The phrase was intended to show the relaxation that could come from using the company's products, and it is now an expression used to show a desire to relax.
    See Full Answer
    Filed Under:
  • Q: What is non-detergent soap?

    A: Non-detergent is a marketing term typically used to describe a type of soap that does not contain synthetic components. Soaps and detergents are both cleaning products, and soaps are generally considered a detergent by definition. However, under FDA regulations, soaps are classified as containing metallic salts of fatty acids.
    See Full Answer
    Filed Under:
  • Q: What are the basic steps for making soap?

    A: To make soap, measure the lye, water and oils according to weight. Pour the water into a glass bowl, and pour the lye into the water. Stir the lye and water combination with a non-reactive spoon. Melt the desired oils in a saucepan, and allow them to cool to 95 to 115 degrees Fahrenheit. Slowly add the lye mixture to the oil, and stir the mixture to trace. Pour the soap into molds to harden.
    See Full Answer
    Filed Under:
  • Q: Why is ethanol added to soap?

    A: According to Newton, ethanol is added to liquid soaps to serve as a germicide. Ethanol is considered to be insoluble when mixed into a solid soap.
    See Full Answer
    Filed Under:

Explore Hygiene