If you are putting up a wooden fence and need to make the gates for it what you will need is a saw, deck screws, measuring tape, level, hinges, wood, and locking latch. Some tips and warning before you begin are measure it twice and only cut only once, you will need a second person to help hang the gate. You will need to measure the opening where the gate will go post to post and deduct 1 inch.
. Once you have your measurements you will measure the wood, you will want to make the gate stronger by cutting diagonal on the ends. You will need to cut board for support posts and using deck screws you will need to install two screws in every corner of the two frames. For more information on this query you can visit this trusted site http://www.ehow.com/how_4718468_build-folding-wood-fence-gate.html on step by step how to.
